How to reset time zone on Lacrosse atomic clock

Question edited for clarity and toss in some CAPS.
question moved from Audio Players category.

Set Up starts here in the manual

https://www.manualslib.com/manual/1591844/Lacrosse-Bbb86088.html?page=4#manual

..

To correct the time on your Sharp Atomic clock, you will need to reset the time zone. To do this, press and hold the "Time Zone" button for 3 seconds until the time zone flashes. Then, press the "Hour" and "Minute" buttons to adjust the time zone to the correct time zone. Once the time zone is set, press the "Time Zone" button again to save the settings. The clock should now be displaying the correct time.

Mine does that. i just select another time zone that has correct time and forget it, it is not a big deal.

help video

https://www.google.com/search?q=set+time+on+Lacrosse+Atomic+Clock+model+8888773

..

Your time may be off by 12 hours or in the wrong time zone.

It sets itself eventually from the source in Colarado. You just choose the Time Zone.

This manual should work for you.

http://www.klockit.com/pdfs/87214.pdf

There are many LaCrosse atomic clocks. Which model do you have? Support for most is available here: http://www.lacrossetechnology.com/support/home.php . Use the drop down menu to select the model.

For the analog clocks, there is a manual set button on the back of the clock. Press the button and wait for the clock to advance to the correct time. Then make sure the correct time zone button has been pushed. Then make sure the clock is in a location where it can hear the signal overnight. (For best results stand the clock upright in a window.)

For WT-2165U travel alarm, press and hold Set to enter the setting function. Then select the time zone (with + or -) then press and release Set. Set the DST setting to on or off as needed, then press and release Set again. The next setting option is the snooze alarm duration. Press and release Set again to change the hour manually (+ to increase). Press and release Set again to set the Minutes. Correct the date (year, month, day, day of week) similarly. Then set the display to 12 or 24 hour time. Press and release Set to finish and exit the set functions.

For some of the digital clocks you can set the time manually by pressing and holding Set. First set the time display mode (12/24), then press and release Set again. Then set the hours, followed by Set and then the minutes. Continue through other menu options or just do not press any buttons for several (30) seconds.

On the digital clocks, the item being changed will flash.

To avoid interference with the signal reception, place your radio controlled clock where it will be at least six feet away from a TV, computer, air conditioner or other household electrical appliances. The optimal location is near a window. Windows facing Colorado providing the best signal.

I hope this helps.

Cindy Wells

Is it one of these?

http://www.klockit.com/PDFs/lacrossemanuals/WS-8157NU.pdf

http://www.klockit.com/pdfs/87135.pdf

http://www.klockit.com/pdfs/87136.pdf

BTW, 24-hour military time and time zones are independent functions.

press set button repeatedly -you get timezone mode and change your wished time zone and select your zone then press set button to normal mode and adjust the current time.
thanking you.