I have Siemens Giga Set A 530 Model phone. I want to put password for outgoing calls is there any way to do this. Please any one can help me.

SOURCE: help with siemens giga set4200

Hello, it sounds as if your base has gotten corrupt somehow. You can try defaulting it, but keep in mind you will lose all your messages, and will need to re-register your handsets if it works. To do so, get all your handsets together near you base. Unplug the power from your base and turn the base over. Push and hold down the Page/Registration key and keep it held down while you plug the power back in. Keep the key held down for at least 15 seconds, then release and begin registering your handsets. If you need help, I can email you a "cheat sheet" on doing so. You can contact me at www.cordlessrepair.com Good Luck !

Damen Wong

• 1950 Answers
• Posted on Feb 06, 2008

SOURCE: need password for sonyericsson w700i to restrict the outgoing calls

Hi,

The password you need for restricting calls is operator related. You can get the code from your mobile operator.

SOURCE: siemens gigaset A410 problem with some hardware

Your unit got hit by a lighting strike, but it is fixable. Go to www.cordlessrepair.com

SOURCE: The problem with our phone

Hi Litchfield_s... I have found the solution... if you still have the problem, please post again... Carly

SOURCE: Philips VOIP8411B/37 IP Phone - Cannot make outgoing Skype calls

the internet connection's outgoing is too slow. ALl internet connections have an outgoing and an incoming speed. Make sure you are not uploading anything to the internet or get a faster internet service provider