How do you set the H500 Bluetooth device in discoverable mode?

Here are the steps to connect your Motorola H500 to your Nokia 2680 phone:
1. Switch off your H500 by pressing the main button for few seconds. 2. Put the H500 in discovery mode. To do this, press and HOLD the main button till it glows a solid blue light (no blinking). 3. Open bluetooth in nokia phone. Go to Menu, settings, Connectivity, Bluetooth. 4. Select "Add a new Device" and search for H500 5. Click on the name select pair. 6. it will ask for pairing code. Enter "0000"
You are done. Revert in case you have any problem

i have htc smart phone i got motorola h500 bluetooth headset but its not shown signal in my mobile what can i do?

Is the headset in the discover mode? Usually its a 2 button press and hold until the led blinks or changes color.

Have you put the headset into "discoverable" mode? This has to be done before the computer (or other Bluetooth capable device) can "see" it and register it. Check the instructions for the headset as to how to put it in the discoverable mode.

Step 1: Set the headset to be discoverable

Turn off the headset.

Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.

On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000. let me know does thsi help regards golu_fixya
Step 1: Set the headset to be discoverable

Turn off the headset.

Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.

On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

Start with your headset turned off. Then, press and hold the call button for 6 to 10 seconds, until the indicator light is steadily lit (it will flash as if it was being turned on, but don't release the button at that phase). It is in pairing mode. Now make your phone's bluetooth application search for new devices. After a while, the H500 will appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, the indicator light will flash rapidly, and then, it will enter the stand-by mode. Otherwise, turn your headset off, and go through the whole process again.
Hope you are able to sort your problems out.
Regards, Carlos

Try this link. It solved my issue www.scribd.com/doc/280088/motorola-h500-bluetooth-earpiece-manual. Basically what you need to do is power the earpiece off. Make sure that your IPhone is not currently attempting to discover bluetooth devices (i.e. Bluetooth is OFF). Hold the On button on your earpiece (it has the symbol of a phone on it) for 6-10 seconds. The light on the earpiece remains lit. Now your earpiece is in discovery mode. On your IPhone, go to Settings, General, Bluetooth. Turn Bluetooth ON. Now your phone and your earpiece are both in discovery mode. When you see "Headset" listed, select it and enter the password "0000". Your IPhone is now paired with your H500 headset.

please ensure blutooth is on in the moto and the blackberry and its set in a "discoverable" mode..after that search for bluetooth devices in range and connect..if it asks for a PIN the usual code is four zeroes 0000
hope it helps!
regards!

Instead of selecting "Find Me", click "Add Audio", H500 will show up

I have a Motorola H500 headset & was having the same problem. I think it's all in the timing. With the headset off, hold down the Call button for 6 to 10 seconds until the light stays lit--solid light, not blinking. This is when the headset is in "discoverable" mode. Immediately access the settings & tools menu on the phone, then to the bluetooth communication settings to locate & pair the phone with the headset. Hope this helps with your devices.