How can i get the channel auto scan on my Hisense 55h6sg tv to find any channels.

This will be a main board issue, replace the board and the set will work like it's supposed to. I would take another TV and run a channel scan and be sure your antenna is picking up the channels before ordering a main

First make sure that you have the antenna connected to the RF jack. Go to the Home screen of the TV and select the Antenna TV tile on the right hand side of the screen. (If you acquired the TV from a previous owner, they could have hidden this tile. See the steps preceded by Otherwise.) If this is the first time you scanned for channels, just follow the onscreen prompts (including setting your time zone). Otherwise, go to Settings (below Home in the left column on the home screen) > TV Inputs > Antenna TV > Scan again for Channels > Start finding channels. Use the arrow keys to navigate the menus/tiles and press OK to enter. To save, make sure to select Done and press OK.

The manual for the Hisense Roku TV (2019), 32HF4030F is available here: https://www.hisense-usa.com/support/models/32H4030F_hd-hisense-roku-tv-2019 . The current link to the manual is https://assets.hisense-usa.com/assets/ProductDownloads/88/c8c9a74079/Roku-User-Manual.pdf . The section for setting up TV channels starts on page 39 of the manual. See the section starting on page 10 for information on using the remote or TV front panel buttons in the menu.

I hope this helps.

Cindy Wells

If you have a smart phone you can download a remote app to use instead of the original remote. Then you could go ahead and scan the channels after setting up the app.

Check if the antenna plug at back of tv is plugged in right. Otherwise it wont make good contact

No power or no digital channels? If no digital channels you have to scan on antenna if no cable...more info?

That depends on the type of antenna, but in general it attaches to the same jack as your cable would. On the tv setup menu there witll be an option for cable or antenna, and then you'll need to run a scan to setup the channels. If the antenna you chose doen't have a ***** on connetor like cable, you can get an adapter at Radio Shack.

Corrupted software. A firmware update is necessary. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

put the co axel cable in the back , bypass this tv programming stuff put your tv on channel 3 or 4 and use the cable remote , no tv channels just cable

that looks like an android smart tv. You would need to run the google play store application on the smart tv and search for chrome browser and then download it and install it.
you most likely will need a gmail account to use google play store.