An Electrolux?
The E20 fault code means there is a blockage in the drainage system of the machine.
Check the drain hose, the laundry sink tub and also the pump filter at the bottom right hand side of the washing machine on the front of the cabinet. Pry the door open, undo the filter bung and clean out the pump housing ok,
One of these is blocked and it is restricting the flow of water when the machine should be fully drained before spinning.
.
SOURCE: washing machine error code on Frigidaire ATF6000E
thank you larkinator.. that totally fixed the problem as far as i can see right now, I am letting it "wash" a load of nothing. it was a bunch of BS how they hid the filter... I had to literally take apart my whole machine. :-) but its fixed, THANKS!!!!!
SOURCE: AEG Lavamat Turbo 12830 - error code E20
Hi
E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.
regards
SOURCE: What does the error code E20 mean please
E20/21: THERMISTOR resistance drifted out of range (faulty), or ambient temperature below freezing.
SOURCE: where do you get what the washer error codes mean
Please see the following:
http://www.managemyhome.com//mmh/lis_pdf/OWNM/L0407366.pdf
Testimonial: "thanks for the help oldguy5"
199 views
Usually answered in minutes!
×