Sanyo DP46848 LCD TV Logo

Related Topics:

s
steven van horn Posted on Nov 30, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a sanyo tv model # DP46848. one half of the sreen stays dark until it seems to warm up. it is taking longer to warm up now. is it repairable and what part would I be looking for. thank you

1 Answer

Electro Med Services

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Sanyo Master 6,694 Answers
  • Posted on Nov 30, 2016
Electro Med Services
Sanyo Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 13, 2010
Answers
6694
Questions
3
Helped
1871984
Points
21433

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
http://electro-medical.blogspot.com/

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why does my sanyo dp46848 screen go dark but whites are too bright?

First try to gently push the cable between the main board and the LCD controller (T-CON) board and if that doesn't affect the image then replace the T-con board.
0helpful
1answer

I have a sanyo modle no DP46848 1/2 of the screen keeps going black and after it warms up it starts jumping in and out if you shake the th it will come on 4 a little while then starts cutting out it a

It sounds like a loose plug or connection and would require someone to take the set apart and do a visual inspection to locate and correct the issue.
1helpful
1answer

DO THE SANYO DP42848 AND THE DP46848 LCD TV 2008 MODEL USE THE SAME CIRCUIT BOARDS

No boards in those models interchange with each other. Totally different.
8helpful
4answers

I have a Sanyo 46 inch flat screen hdtv purchased from walmart sept, 2009. Sure enough, months later my tv is having picture problems and getting worse. It started having portions of the screen darken,...

Call Sanyo for warrenty repair,tv is less than a year old.The problems,u discribing could be cause by the Tuner board,that the board,where the incomming broscasting signal cable plug into it.Worse cause,the LCD picture screen is shorting out and dying,than the tv is not worth repairing.The LCD screen panel are 90% of the tv,will cost the same as a new tv,if the LCD screen panel was to be replaced.Sorry,than the tv not worth as a whole tv any more,only as electronic's boards for parts,that it.
0helpful
1answer

Sanyo 46 IN. tv DP46848. The left 1/3 of screen is dark

It is a common problem for this model of a Sanyo TV, it uses a Samsung or Chime LCD panel.

The problem is the data buffer IC soldered on the flat flex cable between the LCD panel & the buffer board that gets damaged or loose soldering. If you be able to fix yourself, you may find some videos on YouTube, it will show you how to fix the buffer problem.
42helpful
11answers

I have a Sanyo 46 inch flat screen hdtv purchased from walmart aug. 31rst, 2008. Sure enough, 13 months later my tv is having picture problems and getting worse. It started having portions of the screen...

I have the same problem, my television is faded black on the left side with lines on the left top side. I have had the 46 inch unit for 1 year and 7 months. I am planning to write a demand letter to Sanyo and then taking them to small claims court woth evidence that this is a common problem with their units that they know about and is not trying to remedy. Also the Attorney general in Texas should have an interest in them (Walmart and Sanyo) selling these defective proucts in the state.
Not finding what you are looking for?

73 views

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...