How to access the menu on sanyo dp26648 without remote

If you're trying to change the channel, it's the last 2 buttons on the side of the tv.

If you're trying to scan for additional channels you'll need a universal remote.

based on what the manual says you need to press the "menu" key to do a manual channel search.
unfortunately there is no menu key on the side of the tv.

here is a cheap universal remote that includes the menu button.
https://www.amazon.com/RCA-RCR503BZ-3-Device-Palm-Sized-Universal/dp/B007TAMHRI/

You must have a remote with menu function to get into the remote. Sorry.

Your GE Universal remote needs to be programmed to match your Sanyo model 32648 TV.

Please visit:
https://jascoproducts.com/support/ge-universal-remote-codes

It will tell you how to determine which version of GE universal remote you have, and how to program your remote.

Then you will need to use the Sanyo manual to perform the scan:
http://www.manualslib.com/manual/317727/Sanyo-Dp26648.html#manual

INITIAL CHANNEL SEARCH is on page 9.

change your device cables or try to put at a pc to check if isworking your pc

Check its T'Con board. This is a common fault to all type of LCD TVs

Unfortunately without the remote you cannot access the menu screen

Hi, my name is John. Welcome. on the front of TV press menu, scroll to setup, select auto scan + Thanks for choosing FixYa....John

Turn off and on

Pixal on Remote

I have a sanyo dp26648, just had it over 90 days and it quit. I can hear the sound, but no picture at all. Just a bright white screen. I can't even go to the menu. I bought the extended warranty but there in not anyone in my area to fix it. They told me I would have to wait until they found one close.

momdukes