How to find the leak in our index air mattress?

How to Repair Your Intex Air Mattress How To Find Leak And

Patch An Air Bed Mattress Correctly

How to Patch Leak in an Air Mattress

find and fix the slow leak

Finding the leak is the fun part as what you need to do is pump up the mattress and wipe an area with very soapy water to make bubbles at the leak site and do that until you find the leak
Then depending on where the leak is the repair is easy to very difficult
Easy will be any flatish surface to difficult a edge or seam leak
Take a look at YouTube for airbed leak home repair and delete code from there what you want to do

When air mattresses first came out, deflating was a major issue. In the last ten years or so, all air mattresses built don't have that problem unless they have a puncture somewhere.

Can I loan you my nephew? He's FULL of hot air, and would be good to have around. "Hey Brandon, air mattress needs air again."

I suspect your problem is in the inlet valve itself.

Is it not seating all the way? Droplets of water applied to it, is air leaking out?
Is there a manufacturer defect on the valve itself, or the valve receptacle it goes in?

Has a pinhole developed in the mattress? Somewhere along a seam?
If so toss it. I am not aware of any patch kit that will help a problem such as this one.

Just my 2cents

Regards,
joecoolvette

Hi - we originally supplied the pump for Sealy and can sell you a replacement pump that will connect directly to your air mattress. The best way to confirm that it is the pump that leaks and not the air chamber is by switching the hoses at the pump. If the same side leaks it is the air chamber that leaks or the hose. If the opposite side leaks then it is the pump that leaks. Ferdinand 905 451 7243

Place the air mattress in the pool and look for the air bubbles coming from the leak/hols.

If you can't find the source by looking and listening for it, then you should fill up a bathtub and put your air mattress in the water. Watch closely for air bubbles - they will point you towards the location of the leak.

When you purchase an air mattress, it will most likely come with a patch kit, including some material, glue, and a small piece of sandpaper. Use the sandpaper to roughen up the area around the leak; which will help the glue stick better. Then make a circle with the glue around the leaking area and cover with the provided material. Make sure to press firmly when attaching the material to ensure that it holds in place.

here are instructions to find and repair.

http://www.advancedinc.org/bed-info/air-beds/how-to-repair-air-bed-or-air-mattress-leaks/