Code for symphonic sc519dd - Symphonic Televison & Video

U pound salt. Get a new remote.

you might have set the sleep setting on remote

Here is the code for your symphonic tv that works for me. It is "0053."


Here are the steps:
1.

Press the "On" button on the symphonic TV to turn that set on.

2.

Hold down the TV button on the symphonic remote until all of the buttons on that remote flash.

3.

Type in 0053 code for the symphonic TV remote as you point the remote toward the TV.

4.

Press either the "Power" or "Pound" ("#") button on the symphonic remote to save the code

It is difficult without remote. Try through the buttons provided in the TV front. Try the MENU button. Scroll through you will be able to get a solution.

put it the mail address on not admitted

hello it sounds like theres a dead short unless you have a multimeter and oscilloscope a diagram and a bit of know how then yes you could do it youself i'd would get a quote for a repair good luck

shaun

The text mode has been activated either thru your cable/satelite box or your tv's. It is activated because the closed caption portion. If you think its because of your channel providers call them for the process to deactivate it . If it's your tvs check your menu's to make sure the closed caption portions are turned off. Good luck

i can't find a setup code to remote setuo

First of all try getting a Symphonic remote - http://www.miracleremote.com/ not that expensive. Then you can access all areas of the TV, including all sub menus and see how the audio is set-up.. Could be you have it in SAP mode, (Second Audio Programming), in which case you will hear nothing...
Bill

I know that shortly after I purchased this tv mine also shut itself off occasionally. The owners manual says that if it is on dvd mode and it's paused or on an inactive menu or something for 15 minutes or so that it would shut itself off. If a dvd is stuck inside it may be causing this? I have no idea about the open/close malfunction.