Where do i plug in the pwer cord for my 32 inch lcd vizio tv. what kind of power cord do i use

usually found on the back..it is usually connected directly to power supply.

Tv power supply board have input and output high voltages issues.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I purchased this tv yesterday and have noticed that the power cord is loose where it plugs into the tv. If I move the tv slightly I lose power.Try checking the plug.

OUR VIZIO 32 INCH COMES ON BUT IT ONLY SAYS ON FOR ABOUT 2 TO 5 MIN AND CUTS BACK OFF AND THE POWER KEEP FLICKERING FROM GREEN TO YELLOW

If you have an old computer kicking around, take the power cord from it, and plug into tv . this should work.

Tries unplug,replug about an hour,see if it reset itself.Not than must replaced the signal tuner board.Plasma have this problems alot.

My vizio recently did the same exact thing. Vizio sent an HDTV tech out to fix it and it was the power board. He put a new board in (took 15 min) and the tv works like new.

I have had the same problem. I called vizio they told me how to reset my tv. It did not help me, However, maybe it will help you. They said turn the power off, Unplug it hold in power button for 30 seconds then plug it back in and power it back up. My white light flickered and then nothing. So I am going to end up buying a new tv all together.

http://www.encompassparts.com/models/?VIZVW32LHDTV10A justmanuals.com
do some research, pick out a weekend, and then replace that power board! save yourself some $$$ but make sure you order the right part and know what you are doing before you start.

sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!