Is Samsung CLASS 4 4K UHD UN70KU630D compatible with Dish Hopper with Sling receiver?

Then you can't use that TV

Hook up your Dish receiver to HDMI 1 port on your TV. Press the input button on your TV remote to change the input to HDMI 1 and you should get a picture on your TV.

Well first I would change the cable ! Even if the set is not that old u may have a problem with the main signal board , I would bet that the Dish receiver , or Hopper had a problem I had this problem with my plasma , but fine on my led's & lcds Hope this helps .

Please read the manual. You should connect speakers to the speaker output of the receiver, or amplifier. You connect the TV with a receiver through a HDMI cable. Depending what would be the source from that you take the output and the place the signal is going to there you should use the input. Don't connect anything without 100% certainty it is correct. You could damage the whole equipment when connected the wrong way around.

What happens when you take the bluray hdmi out? or turn the bluray power off from wall? can you connect audio from bluray with a separate cable? often one device overrides the other. there may be a way of daisy chaining the devices

Do yoy have a Smart TV? Make and model PLEASE

Hi my name is Mike Houston a Social Media Representative at DISH. With our Duo SD 625 DVR, it cannot receive HD signal, there will need to be an upgrade to our HD duo DVR systems. If you have any further questions about our DISH equipment please e-mail me at; [email protected]

You are correct. I feel your pain. This will not work.

HDMI is a pure digital signal and the providers require the content coming over the Dish DVR to be COPY PROTECTED. So it will not work unless the HDMI cable goes directly from the DVR to the TV. This is to stop people from being able to make their own recordings of Dish shows, or making copies of your DVR recordings. If you really want to run things through your reciver, you're going to have to use the "component" or "composite" video feeds, not the HDMI. Sorry.

I would try connecting a dvd player to one of the HDMI input on the tv to be sure the tv is the problem.Try new HDMI cable 1.3 version. ATT uverse boxes are alway a source of problems and I would assume it was bad before I would condem the tv. If the tv is bad and it is under warranty an authorized servicer will replsce the main board.

Hello, my name is Daniel Busa with Dish Network's customer service department, Try hitting input or source on your yamaha box.