Hi there,
The error F05 indicates that the pressure switch is jammed on full.
The only thing you can do your self is to check the filter is not blocked.
Remove lower rear panel of washer, locate and remove large black hose fatened to bottom of tub, watch out for water running out.
Remove and clean plastic filter inside hose.
Refit filter and hose, test for leaks.
If problem still persists, then could be faulty pressure switch or blockage in the pressure system.
Good Luck!!
Thanks
Hotpoint ariston 6kg (model arxd149) F05 is a pump draining problem. Pump impellor can be a) jammed with something e.g small piece of plastic or coin etc b)the pump filter can be clogged c) the pump unit or pressure switch is faulty. To check a and b is very simple. Remove the plastic cover strip that runs along the front of the machine at the base under this cover on the right side there is a large black plastic screw valve / filter. unscrew this to drain water inside the machine trapped and then remove mesh filter completely to check if it is clogged. next look inside where the filter fits and see and feel with your fingers that the pump impellor (pump blades) are free and intact of obstruction and that u can turn them. replace filter and panel.
4,737 views
Usually answered in minutes!
×