How to Traceroute? - Computers & Internet

It doesn't look like that PVR was designed to interact with Macs. Of course, there are workarounds, if you're ready to dive into your Mac:
https://beyonwiz.com.au/forum/viewtopic.php?f=5&t=820

Do you has a static IP address for the firewall that connection to your route.
PING IT with your phone.
Do a traceroute from your ph,
--------------
Allowing Pop3 traffic to pass though the firewall?

mode exec user Router)
ping ip
show ip route
show version
traceroute ip

mode exec priveligiado
show arp
show interface
show protcols
show ip protocols
show startup-config
erase startup-config
reload

Download.com has alot of free utilities. I would try malware bytes. It sounds like malware to me. Good Luck.

hi

possibly happen due to physical connection.please check the cable and do the traceroute to verify where it is dead.

bear mind also, sometime it could be hardware problem.

hope this help.

Network latency depends on the application you are using , while playing network games it can be high because of long distance of connectivity or long cable connections, secondly it depends on the switch or hub is using between 2 PCs or number of PCs ,
I propose a small solution to you "TraceRoute" which you can download by your own its a 30 days trial, It can analyze your network latency and performance degradation '

Download link
http://www.solarwinds.com/products/toolsets/TraceRoute.aspx

You need to find out if you have a firewall or other piece of network hardware that could be interfering with your connecting to the server. One way to do this is to run the linux traceroute command or windows tracert like this:
> traceroute vent.ventserver.net
> tracert vent.ventserver.net

Also try pinging the remote host:
> ping vent.ventserver.net

problem occurs usually after upgrade of internet speed. contact your ISP again, ask them to check for latency or dropped packets within their network. they need to run a traceroute from their end and it would also be better if you can run a traceroute from your end. also run a speedtest through speedtest.net or speakeasy.net. There's also a possibility that the modem is becoming faulty. If your ISP provided you the modem it's still best to contact them for possible replacement.

You have to allow the following:
ICMP type 8 (Echo) from your DMZ to the Internet (a.k.a outbound)
ICMP type 0 (Echo reply) from the Internet to your DMZ (a.k.a inbound)

This will be done by adding the rules in the firewall section of your DFL-700.