Cannot get power thru pole on electric Remington chainsaw

If you want to know more about the Rimington pole saw go to the link The Ultimate Remington Electric Chainsaw Reviews

This thing is a little monster. I've used it to cut down several small trees and limbs from larger trees. I only need to use the gas-powered chainsaw for the large stuff. I love being able to attach and remove it from the pole. More details The Ultimate Remington Electric Chainsaw Reviews

Remington Saws have ceased operations and, unless you like to make your own replacement parts, they are prone to failure. The gearbox is sealed and the motor brushes are not available anywhere. Look elsewhere!

No power could be a broken wire in the power cord, usually near the plug end. It could also be the switch, or the motor brushes. More rare is a broken wire in the motor or the saw case. Hope this helps!

Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx

• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the YourModelNo - Remington Electric Chain Saw "View Model" link.
• Click “View Owners Manual” or "View Illustrated Parts Diagram" link.

107512-01 is the part number $4.72

RemiongtonPower is no longer in production and eventually eBay will be your only source for parts. HTH
Lou

Problem is most likely in the trigger switch on pole. Bypass switch and test bu plugging lamp into power cord coming from pole

check the bottom of the chain guard, look for a loose bolt just inside the housing.

No, the largest electric pole chain saw that can be attached to a pole with the Remington Pole Saw kit, is a 10" saw.

You can go to Master Distributors to find out more detailed info about your situation and speak with one of their reps.

http://www.remingtonchainsaw.com/

Hope you found this very helpful, best regards!

http://www.masterparts.net/106890-01.html

I hope this helps out.

If you have a Remington pole saw, then no you cannot not get a bigger saw to fit the pole you have. The pole was only designed to fit and support the weight of the saw it came with.