Can't read model and serial numbers on my 2002 Kenmore front loading stackable washing machine

I have never ever seen a 'DO' code. All washing machine codes are E and 2 numbers, except for 'LOC' for 'Lock'..

https://www.searspartsdirect.com/diy/error-codes/washer-repair/1234598/kenmore-417-model-front-load-washer/0582

Try disconnecting from the mains supply for 15 minutes.

https://www.google.com/search?q=Kenmore+model+44082+error+code+%22do%22

..

You need to pull it off towards you

Here is a service manual for the stacked set. The model may be a little different but the repairs will be the same.

it should make a loud buzzing noise

A long wire flexible brush will work well.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

there should be a number on the belt take it to the spares place and they should be able to match one up for you

Hi. from my research, these machines will have issues that are frequent that deal with the drainage system and motor control as well. the control boards are average in their respective categories but, overall, these units will preform well during the short life span.

The model that you provide is incomplete. However, if the washer loads from the top, they cannot be separated. If it loads from the front, they can.

try changing the door switch. Its either that or the speed controller. the door switch is cheaper and that is usually it.

how do you seperate the stackables for moving