What Is the Difference Between the Static LSP Bound to the Tunnel and the Static CR-LSP?

There is a master code for LG LSP 400 and it worked when I tried it on my LSP 400. The code for it is 6278.... And also all your contacts will be saved nothing will get deleted. IT ALSO WORKS ON SOME OTHER MODELS SUCH AS LSP 350, Etc,.

HOPE IT WORKS.

IF YES THEN DON'T FORGET TO RATE MY ANSWER

Thnx......

MODEL NO. LG CDMA LSP-400R
FCC ID-BEJLSP400
S/N -604HPXB8418050
RSN -RLGFW2005489729

PLZ SEND ME UNLOK CODE

You can add the LSP file to your start-up suite. Type APPLOAD in autocad and then click on the button under the Startup Suite.



Then in this window click on the Add button and add your LSP file.

Hi
Just get the lg lsp 350r unlock code through the LG UNLOCK CODE website. They will provide you with the IMEI unlock code. Just type the IMEI unlock code on your phone and your phone is 100% SIM lock free. Their codes are 100% safe and accurate.

Apparently this is a problem with google desktop. If google desktop is installed, remove it, this should solve your problem.

you need to create an IPSec tunnel between the router and windows server 2003 (run secpol.msc). From the dlink router, you need to set the IP address of the VoIP gateway as part of the LAN that is included on the VPN tunnel. Since it is the server 2003 that has a static IP, you need to initiate the connection from the Dlink router.

how do i fix this annoying "Assert in LSP" pop-up?

Jim of PD

Add a static route on the Sonicwall 2040 : 192.168.1.0/24 with the RV082 as gateway (the ip of the network shared between the RV082 and the Sonicwall)

Another solution is to enable NAT on RV082 for 192.168.1.0/24 network. Routing is preferable.

on this page you can find your driver http://www.bioticaindia.com/lsp-350t.html

I couple of points:

PIX has a few dislikes...

1. Pix does not like class A address, make sure you are using B or C.
2. The VPN subnet always has to be differant to the LAN.
3. Has to have a working DNS server.
4. Add static route, and last resort to main ethernet port that has the DNS & R62. (or 2 if on differant sub)

Hope this helps.