No sound from the bel 880 radar detector

Radio shack

Copy and paste this link in your browser search.

www.bestradardetectors.net/Beltronics_Vector_975R_Remote_Mount_p/bel-975r.htm - 50k

Aduz

This means that the primary local oscillator couldn't be calibrated during the RD's self-calibration procedure. You could get your RD repaird by Bel/Escort, but with these older models, your best bet would be to take advantage of Bel/Escort's trade-in offer to get a current model which provides significantly better performance -- particularly with regards to Ka band radar.

Check Here required user manual please.

Good Day Joe,

Sounds to me like the internal speaker went, this is actually common on radar detectors. Although 9yrs is a lot longer than most will last. If you are handy with a soldering gun you can replace the internal speaker with a new one and get it working again. However be sure to take the unit apart before getting a new speaker so you can match up the size as it varies.

Good Luck and I hope thi shelps

BEL no longer offer upgrade or repair for the BEL 980 detector

They don't have batteries. :d.

There is a phone number to bell on the bottom and they are very helpful.

Good Luck! Its a great detector.

Call bel, the number is on the label on the bottom, I am having the same problem with mine, he was very helpful and said it was probably the speaker which they sell for $8. If your handy with a soldering iron its simple repair. Or they offer a trade up service, giving you like $80 towards a new unit.

Call Beltronics tell them you have an RX65 out of warranty. They charge about $65. When I did mine I sent them only the detector and they also set me a new cord & suction cups.