My Samsung top loader wa80g5 start button wont work. All other setting and power buttons function but wont start. Help

SOURCE: top loader MW511 will not start.

Hi just read your posting.Now on that wash progress line of lights there are 8 lights in total.Starting from the far right what lights are lit up?Is it the 2nd and 5th or the 4th and 8th--etc---?With this additional information I can work out the error code and advise you how to repair this fault.Please reply for further help.

SOURCE: kenmor front loader washer model # 110.42822200

have power lights are on , but wont start and door wont lock

SOURCE: de error code on samsung topo loader stops working

0E - OVER-FLOW ERROR

Over-Flow error occurs when the water level is too high. It can be cleared by turning POWER switch OFF. Water is drained prior to POWER switch OFF. The tub is drained for 2 minutes if a frequency of more than 25 KHz is detected.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

SOURCE: Samsung washing machine SW50USP. Machine

I've just had the same problem with my Samsung SW50USP and had a technician out to have a look at it. Apparently the electronics are fried and it would cost much more than it's worth to fix. Time for a new machine unfortunately.

SOURCE: samsung electronics clothes washer model j845

If you have a face icon lit up the child lock is on, press and hold spin and rinse buttons until it goes off