I need manual for e8 Lexon wall clock

For the Galanz 1.2 cu. ft. ToastWave, GTWHG12BKSA10, you need to press and hold the Clock/Timer pad for 3+ seconds. If needed, press again to switch between 12 and 24 hour clock options. Then rotate the dial until the correct hour is displayed. Press one of the following: the dial, Start or Clock/Timer to save the current hour. Rotate the dial to set the current minutes. Again, press the dial, Start or Clock/Timer to save the current minutes. To exit the clock setting mode, press Stop/Cancel.

HomeDepot has the manual for this microwave/air fryer on the product page: https://www.homedepot.com/p/Galanz-1-2-cu-ft-Countertop-ToastWave-4-in-1-Convection-Oven-Air-Fry-Toaster-Oven-Microwave-in-Black-GTWHG12BKSA10/310997710 . The current link to this manual is https://images.homedepot-static.com/catalog/pdfimages/e8/e87f4420-a777-460f-901f-faa70016a38f.pdf . See page 9 for the directions to set the clock.

I hope this helps. Please add a comment with the model number of your microwave/air fryer if the above steps don't work.

look for a time see button and the + and the - buttons. or get a manual from the manufacturer or on line.

Try:

OPERATION MANUAL - Lexon www.lexon-design.com/media/manuel/LR111.pdf

If this does not work a google search may bring results.

go to this link and scroll down to where you see (ck20 glow-cube-clock-pdf) click on that its the second down on the left that is the manual hope its the one that helps you out.

I have a scan in of the instructions for the LA78 - not very clear but adequate. If the problem is you don't know how to tun off the radio alarm set icon, hold down the Snooze/Light button 2 secs (blue display will light up)

Try:

OPERATION MANUAL - Lexon www.lexon-design.com/media/manuel/LR111.pdf

If this does not work a google search may bring results.

Try:

OPERATION MANUAL - Lexon www.lexon-design.com/media/manuel/LR111.pdf

If this does not work a google search may bring results.

Have a gasfitter bypass the clock. The clock is the source of the problem. You will then have a manually operated heater.

to set the alarm, press and release the "alarm" button; then press and hold the "set" button until the hour begins to blink. press "adv" until
the hour AM or PM is correct;now press and release "mode" so that the minutes begin to blink. Set the minutes using "adv"; now press and release "set". Finally,
press and release "adv" once to bring up (or remove) the alarm icon. Then press"alarm" once to return to the main display.

To set main display, press and hold "set" until the hour begins to
blink; press "adv" repeatedly until hour AM or PM is correct. Now
press "mode" so that the minutes blink, and use "adv" to get the
minutes right; then press "mode" so that the next item begins to
blink; use "adv" to advance until it is correct, then press "mode"
so that the next item blinks, and so forth until you're all done.
Finally, press and release "set".

Here is the link for the manual http://books.jvcservice.com/download/289413083/38360.pdf page 7 Hope this helps :)