Manual franke flair - Franke Flair Espresso Machine with MilkMate

I had a Franke Flair machine in an airport business class lounge. We had a steam wand blocked for safety reasons. Check out the video.

https://www.google.com/search?q=Franke+flair+unblock

..

I am a Franke technician. After and possibly during the descale, because probably you haven'nt done it in a long time, steam was able to escape through the fittings as the limescale damaged the silicone rings beforehand. The steam damaged the klixxons or the thermoblock itself. You will need one of us unfortunately....

I had a Franke Flair machine in an airport business class lounge. We had a steam wand blocked for safety reasons. Check out the video in the link.

https://www.google.com/search?q=Franke+flair+unblock

..

its a brewer fault or brew motor.

there is no reset switch, please wait on the display indicates the machine is heating . but the sensors are not registering the temp. this means either the thermoblock/s have failed (unlikely) there are upto 4 thermal fuses mounted on the thermoblocks . this is more likely the problem. any more info required please et me know

the two main reasons for this are the on off switch located on the back of the machine is switched off. the other is the flap to the grinders is not correctly fitted. other than this an exporative visit by an engineer may be required. there are two mains fuses situated by the cable inlet behind the rear panel.

Where can I buy new seals or a whole new drop tray please

In my experience of that particular machine it is incorrect cleaning. You must use an enzyme solution to clean all the tubes and pipes to dissolve the heated and baked milk.

They also need regular servicing and are not without issues.

I had one in an airport lounge for 5 years.

enter programme button.push and hold for 5 secs.machine will show def product. press programme again to confirm.select product comes up on screen.press the product you want to adjust eg espresso.now use the + and - buttons to scroll through the espresso setting. if you want to adjust anything in the settings, you need to press programme. then make the adjustment with the + and- buttons then press enter when finished the actual adjustment .once finished with the espresso and happy press exit button.repeat the process for the next button. you can down load a manual at franke .com

Hi
I have just bought a Franke Flair coffee machine second hand. It looks like new and the seller said it was in good working order - however it does not have the grinder blocker and I think we need one. I wouldn't mind also getting the once over from an expert and then maybe some kind of ongoing contact should we have problems with it. What are your rates?