How do I take the covers off of my amana D970E-E. All screws are out but covers will not come off

Screws are normally hidden under the feet, under plastic plugs or under rounded screw covers.

https://www.google.com/search?q=soleusair+hmt-d70eip-a+dehumidifier+leaks

..

• Indoor Humidity ' Dry Air ' Home Comfort ' Amana (amana-hac.com)

https://www.manualslib.com/manual/542212/Amana-D965e.html?page=5


Amana D965E Use Care Manual Check Bucket Indicator Light Fan Speed...

Your description indicates a loss of refrigerant in the dehumidifier. The metal heat exchanger above the water collector should become cold when the compressor is running - if it does not, your dehumidifier likely has lost it's refrigerant charge. You will have to take it to a certified (refrigerant handling) technician to repair. It may make more sense to replace with a new dehumidifier.

Check the CPSC website for dehumidifier recalls. they will have details of the brands/models/serial numbers of recalled units.

Your description indicates a loss of refrigerant in the dehumidifier. The metal heat exchanger above the water collector should become cold when the compressor is running - if it does not, your dehumidifier likely has lost it's refrigerant charge. You will have to take it to a certified (refrigerant handling) technician to repair. It may make more sense to replace with a new dehumidifier.

Check the CPSC website for dehumidifier recalls. they will have details of the brands/models/serial numbers of recalled units.

Probably a bad circuit board. Amana is junk..........

hi there.
this is all i could find.
go to this link and it might help you out.
AMANA DEHUMIDIFIER model D945E WILL NOT DRAIN ANY WATER Google Search

Your fan motor is going out. You can remove the screws from the back cover and gently pry it off. After that, look into the unit and you will see the screws holding the front cover. Take the bucket out and remove the screws at the top. All the screws around the entire metal shroud need to come out. Then with the covers off you can see the fan mount screws. You have to move the evaporator very gently out of the way to get to these screws. Remove the fan motor replace it and re assemble the unit.

WHEN I BROUGHT MINE I HAVE A HOSE RUNNING TO A FLOOR DRAIN BUT REMOVE THE HOSE SEE IF THERE IS A PLASTIC COVER INSIDE WHERE THE HOSE HOOKS ON FROM THE FACTORY THE CONDENSATE PAN IS MENT TO HOLD WATER AND THIS PLASTIC PIECE HAS TO BE REMOVED FOR HOSE USE