Three digit remote code for portable dvd/cd mp3 player #pd510 to program apex remote #uk1a
SOURCE: Apex Digital GB4308 remote
Programming the Remote Control Remote-control switchover Press VCR/DVD, SAT/CABLE or AUX to select the device you want to control. To program the remote control Press and hold VCR.DVD, SAT/CABLE or AUX for over 2 seconds until the LED on the remote control turns off. Release the button the LED will light again (the remote control enters the PROGRAMMING mode). Enter three-digit code number for your equipment. If the correct code number is entered, the LED blinks three times. If you enter a code not listed below, or you press any other buttons than SEARCH and 100+, the LED turns off. To search codes Press ad hold VCR/DVD,SAT/CABLE or AUX for over 2 seconds unil the LED turns off. Release the button (the LED wil light again) and the remote control enters the PROGRAMMING mode. Press SEARCH. Press CH+/- to search codes downwards or upwards. Each time you press CH+/-, the code number decreases or increases by 1 while the remote control sends the code number for POWER button on your device. If the desired code number is found,press 100+ to program the code for your device until the LED blinks three times.Then the remote control exits from the PROGRAMMING mode and returns to norml operation. Or press any other button to exit from the PROGRAMMING mode after the LED blinks rapidly eight times, and the operation is not active. To check the current code number Press and hold VCR/DVD, SAT/CABLE or AUX for over 2 seconds until the LED turns off. Release the button (the LED will light again) and the remote control enters the PROGRAMMING mode. Press 100+ . You may read the code numder according to the LED display status as follows. * If there is no operation within 20 seconds during the steps mentioned above, the remote control will automatically exit from the appropriate operation. Code Number First - digit 0 1 0 1 Second - digit 0 0 4 5 Third - digit 0 6 3 0 First - digit Blinks rapidly once Blinks once Blinks rapidly once Bliks once Secod - digit Blinks rapidly once Blinks rapidly once Blinks four times Bliks five times Third - digit Blinks rapidly once Blinks six times Blinks three times Bliks rapidly once
SOURCE: Need a code for APex AD1115 DVD Player
if this remote uses 3 digit codes, try the following: 214, 215, 216, 401
if it is 4 digit, try these: 0386 0390 0391 0392 0424 0430 0436 0439 0445 0457 0459 0938 0913 0401 0949
SOURCE: I am in need of the code for an Emerson DVD player
Emerson....................................1004, 1006, 1012, 1026, 1029, 1030, 1033, 1035, 1038,
Emerson................................1046, 1047, 1048, 1049, 1073, 1123, 1162, 1171, 1177, 1179, 1191
SOURCE: need remote control for my Apex Digital DVD player (model 1110W)
DVD remotes typically have 2 sets of up and down arrows for such things. Make sure the remote you purchase is meant for dvd players.
There really isn't anywhere to search for what remote would work perfect for you other than some very costly ones. So I can't really point you in the direction of a make or model.
You can also Email Apex Support and ask them for a replacment remote. It will cost you but no more than a normal remote and its made for your dvd player.
Thank you for stopping by Fixya!
SOURCE: missing portable dvd player remote. need code
In the book with the new remote will be all the codes for a bunch of different brands. Try all the codes under your brands selection. If non of them work, atleast you tried. You can always return the remote.
147 views
Usually answered in minutes!
×