How to reset default settings in dwl 2700 ap.
Remove 13 screws from the perimeter of the back side of the DWL-2700AP and pull the covers apart. On the inside along the bottom adjacent from where the network cable plugs in, you will find a reset button. It is next to the white plug that leads to the antenna. You will need a flat screwdriver or something thin and sturdy to wedge between the casing and the reset button. While the AP has power, press the button and hold it in for a few seconds then release. Give it a few minutes and the factory defaults should be restored. Default IP: 192.168.0.50, Default subnet mask: 255.255.255.0
After reset the button of d-link. It takes user id- admin and password is nothing. type only user id - admin. without password it will open at ip 192.168.1.50
4,330 views
Usually answered in minutes!
×