No Sound pluged into cable, sound worked in the other room. Moved TV into another room now there is no sound and can't program a Big Button TEK Partner universal remote...The remote works the cable box as far as changing channels but no sound......I have no remote for the TV itself...using just cable remote.....PLEASE HELP

Andrew has an excellent suggestion, below link for seniors remotes.

Stuccu Best Deals on Large Button Tv Remotes Buy Exclusive Deals 70 OFF...

Adjust the input control on the receiver to 2nd zone.

Check the audio selecting section. It may have changed from audio via hdmi.

If its making a clicking sound it has probably died by now. We call that the click of death!

Depending on your version of Windows, you may need to update the drivers on your computer. http://www.hitachigst.com/hdd/support/drivers.htm This website gives drivers for various Hitachi hard drives, depending on your operating system.

cable signal is weak. Tech. must check house wiring.

try pluging cable wire directly to the tv to see if you get a picture you may have shorted out the rca connection may need to be repaired good luck.....

is it hard too change fly back

Greetings jdm12,

I can understand your problem, I have some what of the same issues with my home theater setup when watching events. One of the only suggestions I can make is adjusting the "Dolby Pro Logic II Mode". After reviewing your owners manual it appears you should be able to change the mode by pressing the PL II Mode button found in the lower keypad on your remote. It appears the options you should have are Music - Cinema - Pro Logic - Matrix - Stereo. You may want to try Music or Stereo when watching your events. In Stereo setting it should provide sound out of the front speakers and sub-woofer only. In Music, there are more processing that is done so you could hear more then just the front speakers.

I hope this makes your next your next PPV Party a big hit!
Jon
Go Ahead. Use Us.