Lenova s10-3 wifi is not connect - Computers & Internet

Download the printer software and drivers and then print via TSB

Switch on your Mifi.
Make sure it has the Wi-Fi turned on.
Make sure it has a cell phone connection.

You should see a 5 bar triangle in the bottom right of the computer screen. Click on it and select your Mi-Fi name and login with password you set up.

Then you should be able to use your computer browser to access the internet.

http://support.lexmark.com/index

Probably the signal is too low. Click on wifi connection, it should have 3+ lines, if not, try to change place for router. Also, you can try on another wifi network to check if laptop is okay.

are you running windows 8 if so take your mouse to the righthand side of screen there will appear a side tollbar at the bottom there is a wheel tipe thing /settings press this in there is your wifi settings /sounds /shut down click on wifi this then should be the the networks you can connect to using you wifi code

Hi

Please check your Lan,wifi and blue tooth driver, please uninstall and install again.

for downloading the driver please click hear select your operating system and driver category.

if you want to connect both computers in a network the only thing you need is Ethernet cable. if you want both computers to share internet connection you need a router. connect your modem in the router and connect both computers in the router. there are also wifi enable routers wherein you can connect both of your computers wirelessly if they are wifi enable devices.

remove andclean your ram and replace it again. if not change your ram.

You may have setup the wrong wireless in the router. There are 4 flavours. a, b, g, and n. Take a look and see what you setup.