I need the manual for Kenwood Junior Chef please- on how to use elecrtonic controls.

Can I please also a have a service manual for my kenwood chef a701a mixer. e-mail is ncb06045 AT gmail DOT com DOT au
thanks

get it here...

A failed SCR or triac will not always show visually any sign of failure. Chances are good that is all that is wrong. If mixer had been plugged in when it got wet, that is all it takes. Also check the transient voltage supressors if the chef has them. They would be identified on the circuit board. as TVS or MOV along with a number. Only number to use is the one on the component.

If you can find ratings for the old devices, just matching the basic ratings should do. Just guessing, but the SCRs should be 20 amp and 400 volt, If the old ones are a lower rating than my guess, there is no problem with using the higher ratings, if my guess is low, go with the original's ratings. Manufacturer of device does not matter as long as ratings are at least comparable.

Could you send me a service manual for an a901 please? Just inherited one from my nan, and serviced it but stupidly cant remember which order the lower bearings go on the motor :/
[email protected]

there is one here...
http://web.archive.org/web/200707171...tions-A701.pdfbut the pages are in the wrong order and i think some are missing.

I got service manual if any one want it.seamusria-at hotmail.com for kenwood Kenwood chef model A.701A.

Take it back for an exchange. It is defective.

http://www.kitchenmanuals.com/manuals/mfg/kenwood/km300_km400_km600_km800.html

hers the manaul for u rate me as fix ya ok its a pdf file also thx nick use adobe reader to view it 43 pages thx agian for using fix ya