Question about Televison & Video

1 Answer

Logik recorder - error message - cannot schedule recording, there is already a timer at the same time on this channel. turned the box off at the wall & retuned. Any suggestions? Thank you. x

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Televison & ... Master
  • 4,290 Answers

Check programmed recordings you will have a clash possibly in time and date on another channel. If the dvd records two channels at once normally check if it has two channels already set up at the same time to record i the scheduled recordings.
you may have two different channel positions that are the same tv station and have set up two different channels to record the same show. and then you may be trying to record another different channel at the same time. check and delete extra channel schedule.

Another way to have this is as an example say programmed record at channel nine f0r show 1 at 7:30 to 8.35 day xyz and then you set up show 2 to record at channel nine say from 8:30 to 9.35.day xyz this will use two time frames during the overlap from 8:30 to 8:35 on day xyz and if you decide to record a third show you can't between the overlap time frame

Posted on Jun 26, 2016

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
mike0862
  • 5746 Answers

SOURCE: I have a LOGIK 1TB freeviw Recorder and the following message keeps appearing on screen 'Can't schedule recording. There is already a timer at the same time on this channel.' Ther is not a timer recor

Check that there is no recording set! Go to Menu and then Library settings and delete anything showing! This should clear the message showing again!

Posted on Dec 31, 2014

Testimonial: "I have aready checked that there is no recording set, in both timers and library. The message is still showing. Do I need to clear all the recordings that I have set and then reset them?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need to clear all recordings I have set to remove message 'Can't schedule recording. There is already a timer at the same time on this channel? I have checked library and timers and nor ecording is...


Hi Margret -

(1) You must have available space on the recorder. If it is full, you will need to delete enough programs to provide the room needed for the new recording.
(2) You also need to be subscribing to an entertainment program package that includes the channel that the show appears on.
(3) Depending on the service (Tivo, Directv, Dish, CableTV, etc.) there may be other requirements. The quickest response to get this resolved for you will be contacting the service provider (Tivo, Directv, Dish, CableTV, etc.)

Good luck!

Dec 31, 2014 | Televison & Video

1 Answer

I have a LOGIK 1TB freeviw Recorder and the following message keeps appearing on screen 'Can't schedule recording. There is already a timer at the same time on this channel.' Ther is not a timer recording...


Check that there is no recording set! Go to Menu and then Library settings and delete anything showing! This should clear the message showing again!

Dec 31, 2014 | Televison & Video

1 Answer

Techintion setup DVR to record speed channel daily at 7 pm now every night at 7 the channel changes to speed channel how do I stop it?


florami

The following is instructions for deleting timers from your receiver.

Turn your TV on. Press your DVR button on your DISH remote 2 times. This will bring up My Recordings on your TV. Select the Schedule button on the right of the screen. This will take you to the Daily Schedule screen. Select the Timers button on the right. You will be on the Timers List screen. Press and release the Left Arrow button on the remote to move the cursor into the Timers List box. Select the timer you want to remove. After pressing select on the remote, there is a button on the right, Delete. Select the Delete button and it will ask you if you are sure you want to delete the timer. Select Yes. You will need to follow those steps to delete all timers you do not want. As you delete timers, you will not see those timers on the Timers List or the Daily Schedule anymore. I hope this helps.

Ray Calo
DISH Network

Mar 04, 2011 | DISH Network ViP622 DVR DTV Receiver /...

2 Answers

I'm thinking of buying this VCR/DVR combo - Toshiba DVR670 -- but first I want to know if you can program the VCR recording timer using time span information -- not just those codes for programs you find...


Usually, depending on the source, or channel, timer recording can be performed on a VCR; even this model.

The short answer is YES - you can record cable times or set manual scheduled recordings on this VCR. It depends on the channel(s) available in your area, and/or the source (such as cable receivers/set top boxes, etc.) which are intended to be recorded.

Feb 09, 2010 | Toshiba DVR670 Player

1 Answer

How do I tape onto a vhs from analog tv with converter box?


There are 2 options-
Option 1
Connect the coax cables in the following order.
1 From the wall to the input of the converter box.
2. From the output of the converter box to the input of the VCR.
3. From the VCR to the TV input.

Here is how you record with this option.
1. Tune the converter box to the channel you wish to record.
2. Turn the channel on the VCR to channel 3 or program the VCR to record channel 3 this will record whatever channel you have your converter box set to at the time of the recording.

Option 2- (will not work on satellite)
1. From the wall to a 2 way splitter (made for digital cable. General rule of thumb with digital cable is gold does not usually mean good.)
2. One output from the splitter to the converter box and the other to the input of the VCR.
3. Connect an Audio Video (RCA (yellow/red/white cable)) from the VCR to the TV input.
4. Select the appropriate input on the TV for the VCR.

Here is how you record with option-
Tune the VCR to the channel you wish to record and push the record button or program the timer to record the channel and time that you wish.
Note- with this option you will only be able to record channels that you would receive without the converter box. Also each time that you split the cable line you loose part of your incoming signal and depending on how you house is set up this option could affect the quality of your digital signals on the converter box.

Jan 02, 2010 | Mitsubishi VS-55707 TV

1 Answer

Dvd player/recorder DRW 500 does not pick up channels after installing DTV converter box. it will record directly but can't be set for timed recording because it did not find channels


You want to set the recorder timer to record the out put channel of the converter box (either 3 or 4 ) then tune your converter box to the channel you want to record, and leave the converter box turned on until you are done with the timed recording.

Jun 30, 2008 | Televison & Video

1 Answer

Nothing records when I do a scheduled recording


Doesn't record properly, ie: looks like one channel is down when recorded, pre-recorded tapes are ok
Check Q008 for dry joints

Nov 24, 2007 | Panasonic DMR-EZ37VS

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...