How can I set my DELL E2210Hc monitor to reset to factory default

resetting Eizo monitors - RetouchPRO

www.retouchpro.com > RetouchPRO > Tools > Hardware

Apr 10, 2008 - 6 posts - ‎4 authors
is it possible to rest a CG241W to the default factory settings?..the consultant that is working with us is having trouble getting a decent ...

Eizo

www.eizo.se/default.aspx?page=21

EizoOften there are no faulty sub-pixel on a EIZO LCD monitor, but according to the EIZO... Reset the monitor to the factory default settings by choosing 'Reset* in the ...

Setting Eizo Logo Display On/off; Resuming The Default ...

www.manualslib.com > ... > Monitor > FlexScan S2202W > User manual

The EIZO logo appears on the display when turning on the monitor. This ... default settings, and the other is to reset all the settings to the default settings. ?.

1. Push the menu button at the front side of your Dell monitor. The icon looks look like a miniature version of your monitor.

2. Push the menu button again. This will exit the monitor menu and launch the OSD (On-Screen Display) menu.

3. Use the down arrow button on your monitor to select "Factory Reset."

4. Push the menu button.

5. Use the down arrow button to select "All Settings." Press the menu button to save changes.

6. Push the menu button twice to exit from the menu. Your Dell monitor will go back to its factory settings default, and its auto-detect feature will be disabled.

Just go into the menu and perform a factory reset.

The data cable carrying the signal has probably lost a pin ,please remove & check the connector physically

When you are on on screen menu setup, there should be 'reset to factory setting' to put it back to factory default setting. I am not sure which exact model you have, but you cann download user manuals here:
http://www.retrevo.com/search?q=LG+Flatron+L1718S+

• 
  

• 
  
• 
  
• Print this article

Instructions

1. • 1 Push the "Menu" button on the front or side of your Dell monitor. The button's icon resembles a miniature monitor. This will open the main monitor setting menu. Push the button again to exit the main menu and open the OSD menu.
     
   • 2 Push the "Down Arrow" button on the monitor to scroll through the OSD menu. Stop at "Factory Reset." Push the "Menu" button to open the factory reset menu.
     
   • 3 Push the "Down Arrow" button to select "Position Settings Only" to reset the monitor's horizontal and vertical screen settings. Press the "Menu" button to activate the setting changes.
     
   • 4 Push the "Down Arrow" button to select "Color Settings Only" to reset the monitor's red, blue and green color settings. Press the "Menu" button to activate the setting changes.
     
   • 5 Push the "Down Arrow" button to select "All Settings" to restore the monitor to its original factory settings. Press the "Menu" button to activate the setting changes.
     
   • 6 Push the "Up Arrow" button to select "Exit" to leave the monitor reset menu. Press the "Menu" button to exit the OSD menu. Push the "Menu" button again to exit the main settings menu.
     

Hello:
To reset your Dell W4200 to the factory default settings, follow these steps:

1. Press "MENU" on your remote
2. Select "Setup" on the screen using your remote
3. Select "Factory Reset"

If your TV is locked, you can use the default code of 3355 to unlock it.
Manual for W4200: http://support.dell.com/support/edocs/systems/W4200/

http://support.dell.com/support/edocs/monitors/S199wfp/en/UG/setup.htm
The link provides how to operate all your Dell Display functions including the reset to factory defaults

Check the cable...are any of the pins damaged, bent or missing? Can you access the Monitors control panel and reset its settings to factory default?

There could be 3 reasons for this...

1. If color settings are changed from the computer...

try to reset to defaults

2. if colors are changed from monitor..

try to reset to factory defaults

3. If the Monitor cable is loose..

try differnt monitor if available with the same cable which is used to connect monitor and computer, or try using different cable on same monitor and computer.....