SOURCE: how do I use the
http://www.singerco.com/accessories/manuals.html
singer manuals.
http://www.singerco.com/resources/
singer operation basics
SOURCE: The machine isn't making stitches.
Hello
Adjust the Stitch Length;
To make longer stitches, set the stitch length to a higher number. On many sewing machines, four is the longest possible stitch length and two is average.
To make shorter stitches, set the stitch length to a lower number. At a zero, the sewing machine may not actually make stitches, since the needle will go up and down in one place.
Cut a small scrap of fabric, preferably the same type you want to sew with.
Sew a few test stitches on the scrap. Examine the stitches to make sure they're the length you want.
Adjust the stitch length again as needed.
SOURCE: my izek singer sewing machine won't do
Hello there,
First thaing you should check is the tension pulley if it is poperly adjusted. Adjust it to the factory setting. Then check the needle if it is properly sitted. Then you look into the bobbin case and refix the bobbin.
Adjust your thread tension. It may be too tight or too loose.
If your upper thread and bobbin threads are different types, try using the same thread for both. And use a good quality, brand name thread.
Try switching to a needle plate with a smaller hole (a straight stitch needle plate).
(Important: After changing your needle plate, check to make sure your needle aligns perfectly with this smaller hole before starting to sew. A misaligned needle could hit the plate and break, which could be dangerous. And make sure to change your needle plate back for zigzag and other
wide stitches.)
Hope this was helpful to you.
All the best
Elect_Comp
SOURCE: my singer 9410 machine isn't working the wheel doesnt work anymore
it's possible that either a part is worn, broken, or damaged only a sewing machine repair shop can tell what's wrong
SOURCE: how to fill bobbin on singer 9124 sewing machine
Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example 9124 ) & click search
223 views
Usually answered in minutes!
×