Super general washig machine error codE2 - General Washing Machines

Question edited for clarity.

E3 is a generic 'Off Balance' code

If you receive an E3 Error code, your washer may be unbalanced. This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle. Stop the spin cycle.

E3 - Error Code - Stacked Laundry Center - Whirlpool Canada

F8 is taking too long to fill. Check the filter screens on the rear hoses.

The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Aug 21, 2023

F8 E1 or LF or LO FL Error Code in Display - Washers - Amana

..

Question edited for a bit of clarity.

This doesn't appear to be a General Electric (GE) machine and looks to be an Arabian machine. We are in North America. This link might work better for you in your county.

https://www.google.com/search?q=super+general+automatic+washing+sgw721+e+error+code

..

Too much water in the machine.
Check the drain pump, outlet pipe and filter if any.

check out this youtube video on e60 error
https://www.youtube.com/watch?v=-6iNKH9qhKU

you can google you super general swg 1201 E01 error for instructions to trouble shoot. or try you tube.

Run the machine empty to see if you can clear some of the soap residue, E-4 is "suds lock" error and is usually due to using too much detergent.

I have super general washing machine model is sgw 620 this machine coming error E5

Run the machine empty to see if you can clear some of the soap residue, E-4 is "suds lock" error and is usually due to using too much detergent. Switch to powdered detergent and only use about a tablespoon full per load

Right click> Properties>Compatability>Run for Windows XP (SP3) or lower

my washing machine super general sgw7100 has error E-62! how i solve this problem?