Grundig tv unlock code please help

Remote Control Codes For Grundig TVs

Grundig 3 Digit TV Remote Codes
113
110
128
Grundig 4 Digit TV Remote Codes
0195
0160
0161
0171
0310
0320
1144
1124
1131
Grundig multi-brand remote codes instructions for TV's.
1 - Turn on TV.
2 - Press and hold the TV key and enter the codes for your brand.
3 - If your TV turned off then you entered the right code and setup is complete. repeat with next code if needed.

I can't find the GF70 manual but hopefull below could provide some clue to your problem The original key # is 0000 http://www.grundig.co.uk/content/ug/GUVCD2800.pdf?language=en-GB This is new model of grundig and should be using the same method on the lock key. Refer page 22 of 42... Will dig out my old datasheet folder . this might take sometimes... Hope this helps...

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.

Try an auto search with the remote, you might have already tried it :

1. press tv

2. press select and the red button simultaneously untill the LED light flashes twice

3. Then keep pressing the TV and Standby buttons one after the other (not at same time) until the tv swithches off, then press select to store the code, the LED should flash twice to confirm this.


Once you have the remote working the TV, you can get the remote blink back the TV code so you can write it down for future reference.

• Press the TV button on the Sky remote
• Hold down Select and the Red buttons together for approximately two seconds until the LED blinks twice
• Key in 9, 9, 0
• Key in 1 on the numeric keypad and count the number of times the Red LED blinks. This is the 1st digit.
• Repeat for 2 and 3
• Note: no Blink = 0 (zero)

Try an auto search with the remote, you might have already tried it :

1. press tv

2. press select and the red button simultaneously untill the LED light flashes twice

3. Then keep pressing the TV and Standby buttons one after the other (not at same time) until the tv swithches off, then press select to store the code, the LED should flash twice to confirm this.


Once you have the remote working the TV, you can get the remote blink back the TV code so you can write it down for future reference.

• Press the TV button on the Sky remote
• Hold down Select and the Red buttons together for approximately two seconds until the LED blinks twice
• Key in 9, 9, 0
• Key in 1 on the numeric keypad and count the number of times the Red LED blinks. This is the 1st digit.
• Repeat for 2 and 3
• Note: no Blink = 0 (zero)

Try 0345 563 582 515 098 584 219 104 233 223 065 471
Grundig
FT70-700 822DOOFA MW82- 500IRDT ST63725 ST63755 TF55-302 GT210S. MW822699 CVC2030ST ST70-875
563
Grundig
T70-1021, T70-1022
065
Grundig
MW82701 ST55/730 MW70/2700
582
Grundig
GT1401
515
Grundig
T55-1120 T55-1020 WF703020
471
Grundig
32WF100 W82-2030
584

Ok this info does not seem to be anywhere so here goes.....

Grundig gud300hd and others of same build alba ect...... set top box pin reset
UNLOCK CODE1. Press MENU and go to Settings and press OK.
2. Go to Parental Control and press OK. The 'Enter the PIN Code' menu will be displayed.
3. Press i (information) button once then enter 4000.
4. Go to Change PIN Code and press OK.
5. Press i (information) button once then enter 4000.
6. When it prompts for New PIN enter the desired PIN number using 0~9 keys. Enter it again to confirm.

hope it helps

Sanyo 0 1 5 4 ,0 1 5 9 ,0146

One of these shoild work for you

Please rate my help++++Thanks for using FIXYA

iv typed in the wrong code on my grundig tv vcr combie and now i cant watch tv because it wont let me by the paswod

Please i have this Grundig lcd tv,model number GU22DVD,how to enter service mode to change sound standard PAL I toPAL BG,help me.