After 2 years in storage, it turns over but why doesn't it start?

Contact any service technician.

see the video and proceed according. God bless you

Need a wiring diagram, then walk down any circuit you like,
testing as you go

Can not resolve any vehicle issues changing parts & guessing

YES! You need to wait at least 24 hours before running the unit if you laid it down. It needs time for the oil to run back down to the compressor. Keep me posted.

hi,
try to hard reset your phone first by doing this procedure...
To Hard Reset Samsung I9000 Galaxy S
1. Turn the power off. If your Samsung Galaxy S is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO

If YES is selected, all data including third-party applications will be deleted from your Samsung I9000 Galaxy S. Once the wipe is complete, the phone will reboot to its factory fresh state.

if you do the above procedure and nothings happen ,its time now to re-flash your phone to its original version and a certified mobile technician will do that for you...thanks for trusting fixya

Clean the gas tank,after a year gas can turn into a gel which will clog the carb,clean the air filter,check spark plug,and readjust the carb(a small screw on the carb

No, the 180 doesn't have a battery backup. What are the symptoms ... does the sewing light come on or is the machine completely dead. Where did you store it ... is there a chance that the damp has got to the electronics inside ... if so it is best not to power it up until you have an authorized bernina engineer look at it and possibly clean the main processor board etc.

Since it has be sitting in storage suggest you start out by cleaning the barttery cable ends. Then try to start it. If you are still just getting clicks then try a jump start. If it still won't start, then take the fan belt off and make sure that the engine will turn by hand - with a large socket wrench that is! If it will turn by hand, it is in your starting circuit, either a weak solenoid or bad starter. If it doesn't turn then it is internal to the engine.

http://www.applianceaid.com/gas_dryer.html#noheat

Car doesn't turn over,but ignition turns on? Doesn't happen all the time,it just happens.. If I let it sit for a while it all of sudden turns over and starts. Happened twice this year..