WL-SB-210-GG Mobile Wooden Ergonomic Kneeling Chair in Black Fabric

Question moved from Spanish car manufacturer 'Seat' category pronounced (see-at) to a Temper-Pedic one.

It sound like you have a part for a different chair. contact Support on Monday.

https://help.tempurpedic.com/hc/en-us

https://www.google.com/search?q=tempur-pedic+tp600+office+chair+assembly+instructions

..

Question edited for FULL 'make model (what it is)'.

Please don't write in all CAPITALS. It is deemed SHOUTING and is hard to read.

Video manual in the link

https://www.google.com/search?q=TP4000+CHAIR+manual

..

Hello, Norman -

I am answering from the USA. I see Kogan is an Australian and New Zealand online retailer.

Is the chair you are referring to this one on the Kogan website:
https://www.kogan.com/au/buy/black-executive-office-chair-faux-leather/
Note: The information about the chair states that an owner's manual (which should have assembly instructions) will be in the box with the new chair.

If you have not already done so, I suggest you contact Kogan and ask for the assembly instructions for your model chair. You can fill out the form here to send an email message:
https://www.kogan.com/au/help/question/new/complete_question/support/

Best wishes.

The installation process for the backrest post on a Tempur-Pedic TP8000 ergonomic mesh mid-back task chair may vary depending on the specific model. Here are some general steps you can try to install the backrest post:

1. Before installing the backrest post, make sure you have all the necessary hardware and tools. Typically, you will need a Phillips head screwdriver and the hardware that came with the chair.
2. Start by positioning the chair upside down, with the seat facing up.
3. Locate the holes on the backrest where the post will be inserted.
4. Carefully insert the backrest post into the holes on the backrest, aligning the holes on the post with the holes on the backrest.
5. Secure the post to the backrest by tightening the screws or bolts that came with the chair, using the Phillips head screwdriver.
6. Make sure the post is securely fastened to the backrest, and then turn the chair over and adjust it to your desired height and position.
7. Test the chair by sitting on it and making sure that the backrest is secure and stable.

If you are having trouble installing the backrest post or if the instructions on your chair are not clear, you may want to check the manual that came with the chair or contact Tempur-Pedic customer support for assistance.
It is important to be careful when installing the post to avoid damaging the chair or injuring yourself. If you feel unsure about doing this, it is best to contact a professional or Tempur-Pedic customer support for assistance.

To lower the back, lift it until it stops firmly. Now let it fall all the way down. (It might need a little push to go all the way down.) To raise the back, lift it slowly until it clicks once. Each click is a height setting; it will stay at that height. Repeat until the back is high enough. To go back down, start over.
(This definitely applies to Tempur-Pedic TP4100 Office chair.)

I don't recommend that you build your own kneeling chairunless you are very experienced in building things with exactmeasurements. Unless that chair is buildexactly to the proper specifications, it can do more harm than good. If you are up for the challenge, check outthese instructions on how to make a DIY kneeling chair:http://www.ehow.com/how_7683611_diy-kneeling-chair.html

According to Wikipedia, a kneeling chair is a type of chairfor sitting a position with the thighs dropped to an angle of about 60 or 70degrees, vertical, with some of the bodies weight supported by the shins.

Look up manufacturer for the chair and call customer service for instructions on assembling your chair.