When i did the INTIALIZATION in korg x5, the PROG,COMBI,GLOBAL & MULTI is not stopping in blinking. How will i proceed to PRELOAD??? Pls help me. Thank you. Add a Comment:

https://www.google.com search of the internet gives the following result:

https://www.sweetwater.com/sweetcare/articles/initialize-reset-preload-korg-x5-x5d-dr/

How to Initialize (reset), and preload on the Korg X5/X5D/DR

• Article #16230
• Updated on Apr 27, 2007 at 12:00 AM

Initialization: Hold Page + and Page - while turning it on.
Preload: Global Screen 5A, then select "OK".
ROM Check: Hold Edit and Global/Multi while turning it on.

Here is a helpful video! https://www.youtube.com/watch?v=9irGuV5fwWU
If you don't know how to get to global mode, look here: https://www.manualslib.com/manual/90209/Korg-X50.html?page=93

How to Initialize (reset), and preload on the Korg X5/X5D/DR Initialization: Hold Page + and Page - while turning it on.

Preload: Global Screen 5A, then select "OK".

ROM Check: Hold Edit and Global/Multi while turning it on.

It's on this link-
How to Initialize reset and preload on the Korg X5 X5D DR SweetCare

initialization: Hold Page + and Page - while turning it on.
Preload: Global Screen 5A, then select "OK".
ROM Check: Hold Edit and Global/Multi while turning it on.

That sounds like a manufacture date being flashed. Have you checked the battery? If you can't backup first, all your changes (custom sounds) will be lost, but that might be what you are looking at. Replace the battery, or have a service center do so. You'll want to reset after.

Try ROM check first.

Initialization: Hold Page + and Page - while turning it on.
Preload: Global Screen 5A, then select "OK".
ROM Check: Hold Edit and Global/Multi while turning it on.

Guide:
How to Initialize reset and preload on the Korg X5 X5D DR SweetCare

FACTORY RESET:

1. Press the [GLOBAL] button to enter Global mode.
2. Press the [EXIT] button.
3. Press the [UTILITY] button
4. Select "Load Preload Data," by using the ClickPoint [?] button, and press the [CENTER].
5. Choose "Kind," (All)
6. Press the [MENU/OK] button.
7. When a dialog box will ask you, press the [MENU/OK] button

You can try this.
STEP 1:
Set Program protect and Combi Protect to OFF.
- GLOBAL
- Using PAGE+ or PAGE-,
find untill the display show "3A-MEMORY PROTECT".
Set the parameter to OFF by using YES or NO button.
STEP 2:
Data Load.
- GLOBAL.
- Using PAGE+ or PAGE-,
find untill the display show "05A-PRESET DATA".
Change ALL to PRG (your case).
Use Left/Right Arrow button to moving cursor.
Choose "PRE-a" (your case).
Move cursor to "OK?".
Press YES when "OK" blinking for confirm.
Exit (Go to PROG button).

For Combi/Multi patches you can disable control changes for each sound under EDIT 6D but this also switches off other control change instructions (pan, expression, pedal etc.).

Somewhere under GLOBAL settings you should be able to find the modulation wheel Depth setting and set it to 0 which should stop your mod wheel from working but you could achieve the same effect by just keeping the mod wheel pulled all the way down.

Download the owners manual from here and try doing a reset to factory settings
http://www.korguksupport.co.uk/page.cfm?pageid=391#Owners Manuals