Whirlpool Duet Washer/Dryer get brown streaks on clothing

The brown stains are likely coming from the felt drum seal. The OEM adhesive is tar based - and after time and use - breaks down.

You'll need a new felt seal - and the adhesive that is used should be silicone based... eliminating the brown streaks.


Thanks for using FixYa

The drum is stainless steel.
Maybe a nut or bolt is in the water flow tubing that is giving off rust.
looks like you are going to have to take off some of the tubes inside and have a look to see if you can find anything amiss.

The brown stains are likely coming from the felt drum seal. The OEM adhesive is tar based - and after time and use - breaks down.

You'll need a new felt seal - and the adhesive that is used should be silicone based... eliminating the brown streaks.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

MUST USE PROPER DETERGENT FOR FRONT LOAD MACHINES.

O.K. Here it is, I solved it. After calling whirlpool who was of no help at all, reading all links about the Duet washer and/or the Duet dryer, I finally solved the problem myself. I too, thought it was the washer but, upon close inspection, found the felt on the dryer had worn out in one spot. The thin brown lines always showed up on whites and more so on anything very thin. I took the dryer apart and found a small burn line on the drum (brown and thin). I replaced the felt ($60) and used Simple Green to clean off the brown. Works perfect, no more thin brown lines. If you can't take the dryer apart, I called for repair and found the price with parts to average $250.
I was ready to sell the darn thing after it ruined about $300 worth of clothes. All in all, it's been three weeks and still working fine.

The brown stains are likely coming from the felt drum seal. The OEM adhesive is tar based - and after time and use - breaks down.

You'll need a new felt seal - and the adhesive that is used should be silicone based... eliminating the brown streaks.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

The brown stains are likely coming from the felt drum seal. The OEM adhesive is tar based - and after time and use - breaks down.

You'll need a new felt seal - and the adhesive that is used should be silicone based... eliminating the brown streaks.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Remove the water supply hoses and check the small screens inside the ports on the water inlet valve. Make sure they are clear of rust and debris. A common problem is the screens getting rusty and putting the iron oxide into the wash water causing brown stains or streaks to get on clothing and sometimes leaving a brown ring around the tub. I will attach a photo for reference. Sorry for your trouble and I hope this helped. Best wishes.

more than likly it is coming from the dryer. get a paper towel or a towel and run it between the inside of the drum and the front where they come together. stick it through the slot and run around the drum. do the front then do the back see if you see the same streaks. and let me know thanks

Could be the drum bearing worn. If the seal has degraded then you could be getting rust from the bearing in the drum water