Pliz help guyz i need the model number of of ic used in elegance electronic keyboard JC-918 lcd display

It sounds like its back-light is not working. Check it. Check the back-light inverter board, and replace it if needy. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be selected by the drop-down list, by the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window.

If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.
Service mode entry, adjust and exit procedure to many brand TVs are given in detail.

The IC will have a number printed on it. Refer with this number, not with this part number. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window. Power supply schematic diagrams to many TVs are given. Hopes it will help you to find out the actual number of the IC.

If you're sound in electronic, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

Check and replace the back-light inverter. You should have sound knowledge in electronics. If you are, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the dropdown list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

Ned a user manual for the Elegance JC-6188 Keyboard

Dear Sir:

1)In electronics, you must need to get the number of IC.

2)If you get some information like as the number of the Control Panel, will be more easy to find, the I.C.

3) You must shure the why the I.C. was burn? . Normally this problem can occur a) failure for some short of some component around the I.C. b) Power supply +5 or 12 Vdc or Low or Higher( Indicating that power supply is Not Good).

4) Would you please tell the exactly Model, Mark, Serial from your Treadmill? In that way I can help you more, and try to get the Schematic Diagram from your Fitness Treadmill.

Sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

They best thing to do is try to find a broken one on Ebay, they run around $24. I did a search for websites that sell just the keys and couldn't find any. You may be able to steal a key off another type of keyboard, but without knowing the type of mount your keys have I can't be positive that will work. The Lycosa Gaming keyboard, or any specialty gaming keyboard, will be very hard to find specific parts for.
Also, check too see if you have a keyboard withing the serial numbers posted on this website. It looks like they are recalling and replacing some of the keyboards they sent out due to defects.
Link: http://www.techpowerup.com/index.php?85841