Question about Washing Machines

1 Answer

During spin cycle machine runs for 20 sec then stops.After opening and closeing door it runs again for 20sec then stops.Tried re-arranging laundry for balance but still same problem.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 17,130 Answers

Change the program on the machine and try , if the fault clears then it can be related to the program. However if the fault seems to continue it can be due to problems in the drive getting cut off. Check for any problems on the door switch, clean and set if in case there is loose connection that gets disturbed during spin and so resets.

Posted on Mar 09, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speed Queen Model RWM274W-3062 top loader.Stops spin cycle after about 20 sec.When i open and close door it spins again for about 20 sec then stops. What could be the problem, thanks


Washing machines kick off when they're out of balance, like if something is too heavy and waterlogged on one side. Redistribute the laundry and it will be fine.

Mar 09, 2016 | Speed Queen Washing Machines

1 Answer

Motor won't turn on Samsung VRT Plus WF433B*GJ**


,,


When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.

To add a forgotten item:
1. Press the Power button.
2. Press the Start/Pause
3. Wait for the door lock light to go out (Immediately).
4. Add the item, close the door, and press the Start/Pause
The door safety state continues for 15 seconds and the cycle is restarted.
ensure thorough cleaning,
To
Try washing bedding, towels, undergarments,
contact using the ActivFresh
GETTING STARTED
1. Load your washer.
2. Close the door.
Z_
Push the laundry into the drum completely to prevent the laundry from being caught in the door or
....... from falling out of the drum.
3. Press the Power button.
4. Add detergent and additives to the dispenser (page 20-21).
5. Select the appropriate cycle and options for the load (page 14-16).
6. Press the Start/Pause
7. The Wash Indicator light will illuminate.
8. The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
,
When the cycle is complete, the door lock light will go out and "End" will appear in the display.

DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see
"Loading your washer" section (page 13).

When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle
continues.

Pressing Power button cancels the cycle and stops your washer.

The pre wash, wash, rinse and spin indicator lights will illuminate during those portions of the cycle

Nov 28, 2013 | Samsung 4.3 cu. ft. VRT Plus , Steam and...

1 Answer

Bosch 500 series wfmc3301 bosch washer does not stop running the water during a cycle . even will do it with the spin and drain cycle. Even attempting to turn the washer off it will still run and then once...


You have a bad water supply valve which is struck in the on position-this valve is mounted inside the machine right where you attach the supply hoses-cheers Denny

Oct 24, 2013 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

Maytag stops in the middle of washing laundry


i think that the catch on your machine either needs cleaning behind or its failing to click into place and its lose as it would keep running and it wouldnt stop through the cycle, see if you can open up where the catch goes into and see if its connecting properly if not see if you can tighten it up, hope this helps, x

Jul 12, 2012 | Maytag Washing Machines

1 Answer

Beko wm5120...no power even with new fuse


Instructions
  1. Close the lid or door. Washing machines automatically stop when the lid or door is open. Lift the clothing and move it slightly. If the washing machine is overloaded with towels or heavy garments, it might become unbalanced. The washer won't run until the items are adjusted.
  2. High-efficiency machines might stop running when regular detergent is used or too much high-efficiency laundry soap is poured in. If you suspect that the laundry soap is the problem, cancel the cycle and press the "Spin" or "Drain" cycles. Restart the cycle, but do not add more detergent.
  3. Inspect the water outlets. Turn faucets to the left to ensure that both the hot and cold water hoses are open. Tug on the hoses to make sure they are attached and inspect the hoses for thin spots that might be causing leaks. Make sure the hoses aren't kinked. Detach the hoses and run clean water through them to remove clogs.
  4. Is the washer's cord plugged into a grounded outlet? Never use extension cords to power washing machines. Check the circuit box for blown fuses.

Feb 02, 2011 | Washing Machines

2 Answers

I have a GE Hydroheater washing machine. For the past few months I have had to restart it atleast once or twice during a wash cycle because it would stop in the middle of a cycle for no apparant...


try locking your settings by pressing your locking button for 3 or 4 secs till the red lock shows.and see what happens..it might work..good luck

Sep 06, 2010 | Washing Machines

1 Answer

Kenmore washer, model c45092


in all cycle with seven min left washer, m-c45092 stop and door open no spin cycle. pete.

Apr 19, 2010 | Kenmore 45081 Front Load Washer / Dryer

1 Answer

My Magic Chef machine is 17 years old, but looks like new, so I hate to part with it. It stops during the SPIN cycle. I fiddle with it, like turning the dial around a couple of times and it will come to...


check the lid switch,it is located in the area where the lid lands on the washer housing when closed it is a safety feature that shuts off the machine if you open the door during the spin cycle,they can get touchy due to vibration from running,also check your balance ring,if you have a severly unbalanced load it will stop the machine

Jan 25, 2010 | Washing Machines

2 Answers

My MLE2000 washer will start to spin and then


more likely an itntermitent lid switch problem as the washer strats it's spin cycle the motion is causuning the lid switch to open making the washer think some one has opened the lid and it shuts down to be safe check the switch make sure it hasn't come loose and check the actuator on the lid sometimes a plastic piece near the front of the lid that goes into sort of a key hole Good Luck

Oct 16, 2009 | Maytag MLE2000 Front Load Stacked Washer /...

1 Answer

Whirlpool Washing Machine Quitting during rinse cycle


I would say that based on your problem description that the lid /door switch has a loose or faulty contact .. If you open and close it a few times..it starts to spin and yet when you open it.. it doesn't always stop the spinning.. It is either the switch or the actuator that bumps that switch.. That is where I would begin diagnosing the problem... Hope that helps..

Aug 30, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...