Car Audio & Video Logo

Related Topics:

Starr Oldham Posted on Feb 28, 2016

Ptid-8940nr. Why does it turn on and the lights start flashing, then it turns off?

5 Related Answers

hogan doan

hogan doan

  • 227 Answers
  • Posted on Mar 07, 2008

SOURCE: Power Acoustik PTID-4005 BYPASS BRAKE

Just ground you brake wire directly to the metal frame. It should work fine. Goodluck.

Ad

Anonymous

  • 7 Answers
  • Posted on Aug 07, 2008

SOURCE: Power Acoustik PTID-4007

Ignore the above comment... SD cards and USB play fine on there (i have one).
Mine does the same, but leave it for 5-10 seconds after it says close and it loads it up!

Anonymous

  • 1 Answer
  • Posted on May 05, 2009

SOURCE: help i need a wire harness for power Acoustic dvd player

you would have to order it from poweracoustik.com. go to poweracoustik.com then go to contact and there will be a number call it an order.

Anonymous

  • 1 Answer
  • Posted on Nov 20, 2009

SOURCE: how to bypass e-brake to veiw movies all the time

HOOK IT TO THE GROUND WIRE (BLACK)

Anonymous

  • 1 Answer
  • Posted on Jan 23, 2010

SOURCE: i have a power acoustik ptid-5850n, It will not play any cd, dvd, mp3, ect., it will not play anything except sd card, usb, and radio???

I HAVE THE SAME PROBLEM WITH MINE CAN SOMEONE
PLEASE HELP THANKS

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000 chevrolet impala. battery good. starter good. turn ignition key to on all lights normal,

since you tried to by-pass security may have done more damage to a simply worn key problem
0helpful
1answer

My power acoustik ptid-6250 will not cut on anymore. I was listening to it and it started going in out. Then all of sudden it just went out and won't come back on. How do I fix it ?

Going in and out sounds like the antenna cable got loose, but the not turning on sounds like the fuse blew. Worth checking those 2 things out first and foremost.

Do you still have your owner's manual? If not:
http://www.poweracoustik.com/pa2012/manuals/PTID-6250.pdf
0helpful
1answer

It doesn't turn off with the car I have to disconnect it

Make sure the red wire is going to a voltage source that turns off when the key is off.
0helpful
1answer

MY PTID 8940NR WILL NOT PLAY DVDS

Hello,

how long have you been using this player? I suspect the laser (lens) of the player. I think the laser (lens) is weak that's why it cannot read data/files on DVD discs.

To confirm if actually its a laser problem, insert an Audio CD into the player and see if will play. If it plays, then obviously, your laser (lens) is weak. But if it doesn't play Audio CD, then it might still be the laser (lens) or a mechanism problem.

Get a lens cleaner, use it to clean the lens. If that doesn't solve the problem, get a screw driver, open the player's cover so that you can gain access to the lens, use a cotton board to clean the surface of the lens. This should clean dust or dirt that might be on the lens.

If non of the above solves the problem, then know that you need to replace the laser to a brand new one.

To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a professional touch, so if you cannot replace the laser, get it to a repairman to fix it for you.

Once this us done, your player will play all DVD discs again.

Good luck.
0helpful
1answer

Cant use the USB! Says Close! nthing happens!

check the owners manual for the stereo and see what file system format you need to use on the flash drive i know i had the same problem when i changed radios worked on my old one but plugged into the new stereo wouldnt load had to unload the music and reformat the flash drive and then reload the music onto it that took care of the problem. where you have tried two different usb drives would say not likely you have bad drives
0helpful
2answers

Power Acoustik PTID-4007 Okay, so I checked my radio fuse, it's fine. Checked for constant and acc 12v. and they are there. fuses on harness are good. I spliced my adapter harness onto the PTID-4007...

i have Power Acoustik PTID-4007 my problem is not turn on lcd not out audio but yes is take cd and out cd, the screen is move in three postion. help me please
thanks
0helpful
1answer

Speakers are thumping and cracking when powered up...why?

you are better off setting your deck speakers amp to a high pass filter setting on the amp. Adjust gains to increase desired bass and clarity. Turn off loud button if you have one, that will distort your deck speakers.
0helpful
4answers

Screensaver

This might be related to your question, read through the answers.

http://www.fixya.com/support/t126992-bypass_parking_brake_switch_in_order
Not finding what you are looking for?

186 views

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...