Keyboard lights not working - Satellite Toshiba Computers & Internet

when booting up the computer push F11 to access bios
high light standard cmos setup
see if the
keyboard is turn on and if the computer see keyboard make model should display on screen F10
save & exit setup

The problem is in the Keyboard of your laptop some keys are pressed or becomes faulty , change the keyboard

I'd try a different keyboard and see if the caps light works on that - so you can confirm whether it's the keyboard, or computer.

Get a new keyboard....

try shutting the PC down, remove and reconnect your keyboard then boot the PC back up.... 9 times out of 10 this will work

If there is no light on the Bluetooth keyboard it means there is a problem with it.

If the Bluetooth keyboard is not responding try to do the following:

1. Change batteries
2. Go to control panel
3. Click Bluetooth Icon
4. Delete the Bluetooth Keyboard
5. Click on Add new wireless device
6. Press the pairing device on the keyboard
7. Bluetooth keyboard will be detected
8. Follow the onscreen instructions

Hope this helps, Tried it several times and it works perfectly

First put new batterys in the mouse and key board. if you don't have a tester use a flashlight. pen light. push the remote pickup. light will blinknext push key board button and the mouse next. then try it and see if it works.
sometimes do the mouse first, Then the key board

My Dell wireless keyboard doesn't work. I replaced the batteries in it and pressed the green button on the back of it then the button on the wireless thing plugged into the computer. That light blinks for a few seconds then stops but the keyboard still doesn't work. My wireless mouse works fine.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud