How to do If the Root Password of Huawei OLT MA5600T Series Equipment Is Lost?

Yes, Huawei SCUN main control board has uplink ports, it can deloy uplink function in theory, but this solution is not recommend, normally 2*SCUN configured in one Huawei OLT chassis, one is active, another is standby, if active board stops working, all service can be actomatically synchronize to standby board, but since not two boards both configured uplink modules, so the uplink service will be interrupted if deploy uplink function on SCUN.
In all, Huawei GICF and Huawei X2CS are the uplink board for MA5600T. Huawei SCUN boards Thunder link com

"Yes, Huawei SCUN main control board has uplink ports, it can deloy uplink function in theory, but this solution is not recommend, normally 2*SCUN configured in one Huawei OLT chassis, one is active, another is standby, if active board stops working, all service can be actomatically synchronize to standby board, but since not two boards both configured uplink modules, so the uplink service will be interrupted if deploy uplink function on SCUN.
In all, Huawei GICF and Huawei X2CS are the uplink board for MA5600T."The answer comes from a website that if you have more questions to visit their website www.thunder-link.com hopefully it will help you. Huawei MA5680T OLT Access system Thunder link com Huawei GICF Uplink Board Thunder link com

Yes, Huawei SCUN main control board has uplink ports, it can deloy uplink function in theory, but this solution is not recommend, normally 2*SCUN configured in one Huawei OLT chassis, one is active, another is standby, if active board stops working, all service can be actomatically synchronize to standby board, but since not two boards both configured uplink modules, so the uplink service will be interrupted if deploy uplink function on SCUN.
In all, Huawei GICF and Huawei X2CS are the uplink board for MA5600T.

No, it can't. Huawei GPBD, Huawei GPFD GPON boards can be configured in Huawei MA5680T, Huawei MA5683T, Huawei MA5608T series equipment, but can not configure in Huawei MA5800 series equipment.

In my views, Huawei products are very popular in the world, a lot of people do business with Huawei, There are many distributors in China, what I known is that MA5683T is the best-selling OLT, next is MA5680T.

MA5600T is multi service based while MA5680T is just OLT, MA5600T can support service like ADSL, VDSL, GPON etc, while MA5680T only supports GPON, P2P etc, but their hardware and configuration command is the same.

1. General in order to avoid the two upward mouth is connected to a single point of failure, this state data from walking on the piece of the board, if the down off, from another piece of the board, because so that we can minimize the damage of equipment (such as the single board failure) caused by accident, because the pon is generally used for operators, the Huawei OLT if off, affect the users and business all too clear.2. In series between the OLT?Refers to the OLT between redundant or a simple link to each other?OLT can be seen as a layer 3 switching device, but its core technology is the control of the ONU below, interconnection between two OLT operation routing protocol can achieve what you said series topology effect.ONU series of words can be used in a beam splitter, as shown in figure.After OLT downward a 1:2 splitter, spectral ratio of 5 goes, than small optical fiber spectroscopic ONU, spectral than big same optical splitter, optical fiber again by one such a layer, in this way of deployment support 6-7 ONU () under the same pon mouth, perhaps because more droop too big to run normally.

Registered unauthorized refers to MPCP found, but there's no real registered to the Huawei OLT. General because of ONU fill in LOID and password mistake, or did not add the LOID in OLT. Suggest check LOID and password is correct, so whether the input LOID on OLT has been properly configured.cs5o

MA5600T is multi service based while MA5680T is just Huawei OLT, MA5600T can support service like ADSL, VDSL, GPON etc, while MA5680T only supports GPON, P2P etc, but their hardware and configuration command is the same.

Yes, MA5683T can support 10G GPON, but the bottleneck is the uplink bandwidth.

For more information about GPON OLT and ONT, you can visit: Huawei SmartAX MA5600T Price Buy Huawei MA5680T MA5683T OLT Huanetwork...