How do I put the date stamp on my pictures?

If your camera has this option it will be in the settings most likely time and date.
I see no mention of your camera type so here is the proccess on a Sony camera. SONY eSupport How to turn the date time stamp feature on or off

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gregg_27a4d257e54e7920

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

Turn on the [Date Stamp] setting in the [Rec] menu. See page 83 of this manual.

go to menu and select the date and time stamp.

hi the following procedure is to set the date and time...
just do the following steps carefully.
1. Push the function/set button. Press the directional button down to select Date and Time.
2. Push the directional button to the right then down or up to set the date and time. Then press the function/set button to save it.
Then: to put the date and time on your pictures,
3. Push the selector button up to the camera icon, and press function/set. Scroll down to Date Stamp.
4. Scroll right to turn on the Date and Time Stamp, then up or down to until it says On.
Press function/set when your done.

That is your solution.after u set the date/time stamp is embedded in a picture, you can't take it out. ...


thank u
rate me

here is the solution:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.

To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.
your date and time are set now
congratulations!
Rate this answer if it is working with you
thank you
with all my best regards
[email protected]

I have the same camera and the only way to do this is to first, Make sure you have set the date and time correctly on your camera. Take a picture or, view picture you want date & time stamped. Press the circular 'Menu/Set' button. Press down arrow to playback mode. Press right arrow on 'text stamp'. Choose whether to apply stamp to single or multiple photos. Press 'Menu/set' to select photo to stamp. Choose which stamps to add. Date, time, age etc.. Press 'Menu/set' again and select 'Yes' in box. The only problem with this is that it will resize your photos to 3m, which can make them grainier if you took them at a higher res. Gillian

I had the same problem. I wanted to set my Olympus C5000 Zoom to automatically date stamp photos. After going through the entire manual, I had to call Olympus directly. They told me that none of their cameras have an internal date stamp feature. They said that the date stamp lowers the quality of the picture, so they choose not to have the feature available. However, you can manually add the date and time stamp through the software that comes with the camera, just before you print the pictures. Hope that helps...

The best way to add date/ time stamp to your photo is to use watermark software like Bitwar Watermark Expert.
Add Watermark
So users need to download and install the best watermark software on the computer system first. Then, users can choose Watermark Photo or Watermark Video tool based on the required file format but the steps below will show how to add watermark to photo:
Step 1: Choose the Watermark Photo tool and upload the Image file into the software.
Step 2: Choose Add Text to add text watermark or Add Image to add image watermark to the picture.
Step 3: Type in the Text into the textbox as text watermark and edit the watermark by editing the Font, Size, Rotate, Opacity, and Position. Besides, browse the Image to insert as image watermark and edit the image through the Size, Rotate, Opacity, and Position.
Step 4: After finish editing the watermark, click Apply to start the conversion.
Step 5: When the conversion is complete, tap on Open Path to preview the new photo.

I have the same problem, if someone solved this, please let me know [email protected]