I can not get the code due to my number being removed.

If it is the 4 digit security code needed due to radio been powered down then the radio needs to be removed to gain the serial number and part number and then a ford dealer can obtain it for you

that is due to the fact that you probably changed the car battery.
you will need to input the code.
If you do not have it, you will have to remove the car radio and post here asking for unlock code, provide the barcode number on the left side of the radio.

When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your vehicle manufacturer's service centre and get them to enter this code for you.

You will find your five number lock code behind the fuse panel under dash driver side [by left foot] Take a small socket and remove two nuts on fuse box ,pull out about an inch and a half.Now using a flashlight and very small mirror look behind fuse box at the white tag.Look for the 5 numbers together[it will be backwards due to mirror]Write them down.Enter 5 numbers on keypad on door,driver door should unlock.I just did this on my 01 Sable yesterday,Thanks rebolser

the dealer is the only source for these codes

In Toshiba Printer the error codes generally occur due to instability of drivers in system and also due to system related issues either it is supporting or not .So for proper assistance on this issue just get connected at Toshiba Printer Support Number 1-800-243-0019 and get in touch with expert technicians and get your issues resolved. Visit: Toshiba Printer Support Phone Number 800 243 0019 for Help

This is due to the fact that the phone is locked to a service provider and must be unlocked when used into another service provider. So you must get the unlocking code from the first service provider after furnishing your IMEI number and phone number so that the unlocking code is given.
please find some help with the link below , it might help.

Unlocking codes

First phone your local jag dealer with your vin number
They should be able to locate your code
If this fails go to www.fitaudio.com
This will show how to remove

The re activation code should have been given to you from the dealer if you purchased the car new, possibly is in with the owners manuels. you will need this code to re activate due to the built in anti theft program on Honda's. Good Luck, I hope this helps.

DOES SYSTEM INTAKE CODE YOU TYPE AND RETURN WITH ERROR MESSAGE OR JUST PLAIN HAS LOCKED SCREEN? SYSTEM IS DESIGNED SO THAT IF INCORRECT CODE IS INPUT MORE THAN THREE TIMES SYTEM LOCKS ITSELF.WHICH REQUIRES THAN THE NAVI UNIT BE UNPLUGGED FROM BATTERY POWER FOR ABOUT 5-10 MINS TO RESET ITSELF.NOW INCORRECT CODE CAN BE DUE TO WRONG CODE/SERIAL # CARD FOR VEHICLE, UNIT HAS BEEN REPLACED IN PAST POSSIBLY AND YOU ARE INPUTING CODE FROM OLD UNIT UNKNOWINGLY. YOU ALSO WANT TO MAKE SURE CODE YOU ARE TRYING TO INPUT IS FOR NAVI-SYSTEM AND NOT THE RADIO CODE FOR THE STEREO. IF ALL ABOVE CHECKS OK THEN NEXT STEP WOULD BE TO REMOVE UNIT TO RETRIEVE SERIAL NUMBER FROM BACK OF NAVI UNIT THEN GO TO NEAREST DEALARSHIP WHO CAN THAN RUN S/N THROUGH HONDA IN SYSTEM AND RETRIEVE CORRECT CODE FOR THAN SERIAL NUMBER. LET ME KNOW HOW IT GO'S