HOW DO i SET MY CLOCK AND ALARM ON MODEL RP4801A

Can you comment with the model number? It will be on the information sticker on the radio itself. It will possibly start with 'CRX-'.
Try this - Press and hold the alarm set button until the display flashes like your setting the alarm time. Click the same button again and it should swap between buzzer and radio each time you click it. It will probably show some sort of logo on the display telling you which it is set to.

Set the switch on the bottom of the clock to TIME.
Then press the H and M buttons on the bottom of the clock until the time is correct.
Set the switch on the bottom of the clock to ALARM.
Then press the H and M buttons on the bottom of the clock until the alarm you want is set.
Then set the switch on the bottom of the clock to LOCK.

What make and model clock/radio/alarm?

Snooze bar lifts up to reveal H, M, alarm and clock time buttons. To set alarm press alarm button and hold either the H or the M button. Similar for clock time.

With the power off, push the alarm 1 button, then push the clock set button. Use the skip & preset buttons to set the hour. Push the clock set button again to change to the minute. Again use the skip & preset buttons to set the minute. Push the clock set button again to set. You will see an alarm clock in the upper left of the screen to show the alarm in now set. To cancel push the alarm button and then the stop/alarm off button.

Please use the link provided below to download the manual of your choice for further assistance.


http://portablemedia.manualsonline.com/manuals/mfg/rca/rca_clock_radio_product_list.html

Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the instructions is that the 4801A doesn't have a clock icon, just press the SET button until the center colon dots are flashing, Press the rewind or fast forward arrows on the circle next to it to set the time. Set the alarms by pressing the set button until bell 1 or 2 is displayed. Nap is also set with the set button - not sure how to stop it yet.

To set the clock:

1. Press the SET button until the clock icon is displayed (circle with hands at 10 and 2)
2. Press |<< REV or >>| FWD to set the time.
3. AM or PM icon will show besides the time.
   
   

Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the instructions is that the 4801A doesn't have a clock icon, just press the SET button until the center colon dots are flashing, Press the rewind or fast forward arrows on the circle next to it to set the time. Set the alarms by pressing the set button until bell 1 or 2 is displayed. Nap is also set with the set button - not sure how to stop it yet.

To set the clock:

1. Press the SET button until the clock icon is displayed (circle with hands at 10 and 2)
2. Press |<< REV or >>| FWD to set the time.
3. AM or PM icon will show besides the time.
   
   

try looking up the manual on the model number you might find it online. I have the maual for this model.