LOCATION OF AIR BAG CONTROL MODULE - Lexus 2010 RX350 AWD

If you have an air bag light on the dash lit up, I strongly suggest taking it to the dealer. Tampering with these components could cause accidental air bag deployment. (expensive, bodily injury)

Ross-Tech: VAG-COM: VW Issues

www.ross-tech.com/vag-com/vw_issues.html

2009+ Golf/GTI/Jetta and similar no communication with 46-Cent. ... 2000-2001 Golf/GTI/Jetta/Beetle Airbag System (important!) ... We have had a number of reports of Air Bag Warning Lights staying on permanently after scanning with ... the Airbagcontroller, you need to click on Airbags in the Select Control Module screen.

Airbag control module -- "no communication" - E46Fanatics

forum.e46fanatics.com > E46 BMW > General E46 Forum

Nov 30, 2010 - 19 posts - ‎8 authors
The recommendation is to get a new one & have it reprogrammed. ... Is the airbag control module a normal wear item or should I expect that it would last the .... easily shipped, and you have the scanner that can reset any faults it may come with. ... Can'tyou simply reset and see what comes back, then fix it?

jsw airbag module not communicating through VAG-COM - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=330306

SDM airbag tech info - GM Air Bag, Black Box, EDR, Event ...

www.airbagcrash.com/sdmairbagtechinfo.html

GM air bag black box / EDR / event data recorder / SDM / deployment crash data ...Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile, GMC, Hummer and Saturn ... control module, pcm, event data recorder. edr, truck, airbag testing, air bag ... EDR 'black box' air bag module location list posted below. ..... Suzuki 2007-2014

Chevrolet Tahoe location air bag module Questions ... - Fixya

www.fixya.com > ... > Cars & Trucks > Chevrolet

Ask your Chevrolet location air bag module related question. Get free ... How do I fix my ABS control Module for 2001 Tahoe ... How to reset airbags in a 2007 tahoe ... Where is the Air Bag computer modual located for the 2005 Tahoe Z71?Missing: hevrolet ‎avalanche

BCM Basics 101 (03-06) - Chevy Avalanche Fan Club of North America

chevyavalanchefanclub.com > ... > CAFCNA's Sperry Tech Center

Aug 8, 2015 - 3 posts - ‎2 authors
The Body Control Module (BCM) performs multiple body control functions. The BCM can control devices directly connected to its outputs based ...Missing: hevrolet ‎bag

the module is located under the center console , CAUTION WHEN WORKING ON AIR BAG SYSTEM, A CERTIFIED TECH SHOULD BE THE ONLY ONE TO WORK ON SYSTEM. this will avoid false deployment or failure of system in a crash.

most comon location is in the passenger kick panel
best of luck

For the airbag light situation to be resolved you need the airbag code to be deciphered from a scantool that can read airbag codes,,If the alternator has low output it would turn on also the ABS light,If the car was flooded it is posible that the control module did short out its location in in the center bottom console

THE AIR BAG CONTROL MODULE IS ON THE FLOOR AHEAD OF THE CONSOLE.BECAREFUL YOU CAN CAUSE AIR BAGS EMPLOYMENT ACCIDENTALLY.THEY ARE DANGEROUS.THE DEALERSHIP HAS TO RETRIEVE AIR BAG FAULT CODE.

It"s in the steering column...

Please rate as fixya if this helps.
the air bag control module is under the console.

1. Disconnect the battery ground cable.
1. Wait one minute.
2. Remove the center console. For additional information, refer to Section 501-12 .

-----------------------------------------------------------------

1. Disconnect the battery ground cable.
2. Wait one minute.
3. NOTE: Contour shown, SVT similar.
   Remove the rear floor console screws.
1. Move seat fully forward.

1. Fully apply the parking brake.

1. Detach the shift indicator selector bezel.

1. Detach the shift bezel from the selector housing.
   1. Remove three bolts.
   1. Detach shift bezel from the console.

1. NOTE: The rear floor console must be raised to disengage the front retaining clips.
   Raise and remove the rear floor console.

1. Remove the four front floor console retaining screws.

1. Detach the front floor console.
   1. Set the gearshift lever into position 1.
      Partially remove the front floor console.

1. Disconnect the cigar lighter electrical connections and remove the front center console

-----------------------------------------------------------

1. Disconnect the air bag control module electrical connectors.
   1. Depress the locking tang.
   1. Slide the locking bar back.
   • Disconnect the connector.

1. NOTE: The air bag control control module is grounded by the retaining bolts.
   Remove the air bag control module.
   • Remove the three bolts.

--------------------------------------------------------------------------------------------
driver air bag module

1. Disconnect the battery cables.

1. Rotate the steering wheel 90 degrees to access and remove the Torx screw. Rotate the steering wheel 180 degrees to access and remove the Torx screws.

1. Remove the driver air bag module.
   • Disconnect the electrical connector.
   • Remove the air bag module.

------------------------------------------------------------------------------------------

1. Disconnect the battery cables. For additional information, refer to Section 414-01 .

1. Open the glove compartment, press the sides inward and lower the glove compartment to the floor.

1. Remove the passenger air vent duct.
   1. Disconnect the duct from the heater box housing.
   1. Disconnect the duct from the instrument panel register and remove.

1. Disconnect the passenger air bag module electrical connector.

1. Remove the two retaining bolts securing the rear of the passenger air bag module to the cross-vehicle beam.

1. CAUTION: Support the passenger air bag module when removing the retaining nuts.
   Remove the two nuts from the front of the passenger air bag module.

1. Remove the passenger air bag module.
   • Lower the front edge of the passenger air bag module, roll the passenger air bag module around the cross-vehicle beam lowering it into the passenger footwell.

behind glove box

They seldom go bad so don't change until you know for sure. What are symptoms?

for villager/quest help go here

http://autos.groups.yahoo.com/group/villagerquest/
Powertrain Control Module (PCM) CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Servicing Precautions in Section 18-01 .
Removal

1. Disconnect the battery ground cable (14301).
   

1. Remove the four console compartment plastic screws or C/D changer cover plastic screws (if equipped) and the console compartment door (045G36) or C/D changer cover.
   

1. Remove the plastic screw, two lower screws, two center bolts, two upper screws and the screw at the instrument panel bracket, then separate the glove compartment from the instrument panel (04320). Disconnect the glove compartment striker plate catch electrical connector.
   
2. Remove the two passenger side air bag module bracket nuts, the passenger side air bag module bracket bolt and the passenger side air bag module bracket.
   

1. Remove the powertrain control module (PCM) electrical connector bolt. Pull the connector from the PCM and position aside.
   
   
   
   
   Remove the two PCM bolts.
   
   
   
   
2. Remove the PCM relay.
   
   
3. Remove the three electrical connectors attached to the PCM.
   
4. Remove the PCM from the instrument panel.