I have polycom device model pvs-1619 when i turn the device it starts and it turn off and it turn on which is restarting (continuous loop),what is the reason

A boot loop is a common issue that can occur on a computer or mobile device where the device continuously restarts or "loops" through the boot process without fully starting up.
Here are some possible solutions for a boot loop problem:

1. Restart the device: Try restarting the device by holding down the power button for a few seconds until the device turns off, then turn it back on again.
2. Boot into safe mode: Try booting the device into safe mode. This is a troubleshooting mode that allows you to access the device with limited functionality.
3. Clear the cache partition: Some devices have a separate cache partition that can be cleared to fix boot loop issues. You can do this by booting into recovery mode and using the appropriate option to clear the cache partition.
4. Factory reset: If none of the above steps work, you can try factory resetting the device. This will erase all personal data and settings, so make sure to back up any important data before proceeding.
5. Check for hardware issues: If none of the above steps work, there may be a hardware issue causing the boot loop problem. You may need to take the device to a professional for repair.

It's important to note that the steps may vary depending on the device's model, firmware version, and the region. It's best to check the manufacturer's manual or online guide for specific instructions.

I have same problem. it started today........

Have you turned down the squelch or the VOX?

THE PLACE TO FIND EVERY THING YOU NEED IS HERE

http://support.polycom.com/PolycomService/support/us/support/video/index.html

On the Polycom support website download the documentation for the Viewstation SP. It is very similar.

Hi, you need do follow things:
1) check RAM in the back small cover of laptop, clean RAM pins and slots set back or change RAM position each other ,or replace other RAM(same model) if old RAM not works.
2) take out the wireless card in the back small cover that is MINI PCI slot, then turn on. sometimes it cancause this trouble.
help you fix it, and any question keep in touch please.

Hopefully the problem was resolved. Call Polycom to see if it under warranty. Call me at 415.659-8178 if it is not. Maybe I can help. David

this looks like a power issue.replace/repair the power adapter before u send it for repairs to POLYCOM, they will charge u a BOMB

Um; just a thought but if it's software is Win98 and if your system is running XP SP2 or Vista I'd say you really do need a Guru. A simple answer like running in 98 mode under XP/Vista may not work.

As far as the manual goes, "Google" will generally get you what you want. I did and got www.labx.com as a starting point for your manual. many other lisings for it..

Please send me user guide /installation guide for polycom pn4-14xx to [email protected]