Jacuzzi Espree 6036.How can I tell if a problem is in the on/off switch or the switch mounted non the motor ?

if the air blower will not shut off then it will either be the air switch in the blower or the control module that operates the blower will be bad.

http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_21405.jpg

It sounds like the machine uses security-type fasteners, which require special screw bits. You may be able to remove the screws with one of these security bits, such as those sold by Harbor Freight.

When a jetted tub will not turn off it is usually because the air switch in the motor has quit functioning.
A new air switch for your pump costs around $20

US Parts Center

Hi Pat,

The installation manual should be available on this webpage but there seems to be a broken link when you try to download:

http://www.jacuzzi.com/baths/options/models/espree-6032#

You can e-mail Jacuzzi from the webpage and they should send the pdf install document out to you.

Hope this helps!

Hello. yes you can replace the switch. All of the parts come with instructions. plus you can call the jacuzzi repair technician directly and have him/her talk you through the procedure at 866-905-2289. here is the owner manual in case you don't have one

http://www.guillens.com/jacuzzi/images/ESPREE.PDF

There should be a removable panel either around the skirt or in the ceiling below the tub to access electronics and plumbing to repair.

If there is room most definitely you can place the faucets on the tub itself. You can mount them on the left rear. However be very careful drilling the holes and make sure you have it aligned correctly before drilling. Check underneath to make sure there is enough room for clearance and hook up. Here is what it will look like.

If it is a air button that pushes in and comes back up, there is a good chance that the switch (which is mounted on the pump/motor) is bad. If the switch is a touch button on a key pad, the problem is in the control box for the pump/motor.

Go to Jacuzzi.com and find the part number, then go to Guillens.com and find the part you need.

I bought a new house and I have a jacuzzi bathtube . and all the sudden stopped working .. where or how I can locate the pumpe ? the only thing I see is the button to turn it on or off and now it does'nt go on ?!! I checked the circute praker and everything seems okay to me.... help please.