Paper going through printer without printing,

Sounds like print cartridge collided with paper. Open both covers. Try to remove paper carefully without damaging print cartridge. you may need to remove print cartridges to get paper out. Then close every thing without print cartridge in. Reopen covers reinstall print cartridge/s, hopefully, everything returns to normal. It will probably say something about going through the process of realignment.

From the start menu go to printers and faxes select the printer by right clicking and go to print pref and select the paper type it wants

please check page set up and put paper properly on the tray

hi

your printer is A4 Size printer it will not print A3 size

if you fill to print A3 go to HP site and support page find your solution

I have hp 1280 A3 Inkjet printer . When I give print it pick up paper and out the blank paper without printing . a4 printing is ok. But A3 Is majour problem

You need to check your print settings in your print menu (it will open when you give the print command i.e. ctrl P) for the "reject inappropriate or wrong sizes." Here you most uncheck the radio button. Click on properties on the print menu and go from tab to tab to see where you see something like "reject inappropriate or wrong sizes." Usually when this radio button is checked the printer will send all wrong paper sizes through without printing.

Paper jam without a paper jam

Look if you do the paper correctly in the printer and if you have enough colour to print then it should go^^

I have the same printer without the doc feeder. Check the paper trail thru the printer for the paper sensor lever hanging up. It gets pushed up by the paper and can stick, making the printer think it still has paper in it. Pulling the cart unsticks it till you print again.

try heavery paper