When i put paper in the tray, the fax still says load paper
When you load your paper, you must press the Stop/Reset button for it to reconize you have loaded paper.
The Paper tray has a sensor for the same. Open and service the sensor and that will solve ur problem. put the lever of paper loading tray of and on and then try it.
Servicing will solve the problem or tell again if u won't solve.
Viren
Will try all and see what happens
I just unplugged and shut down the machine, put fresh paper in, waited a minute and it started working again.
Warning about that: Unplugging the machine fixes the error but it also clears any queued jobs. I had three jobs that queued because of this 'load paper' error. When I unplugged and plugged in the machine again, it automatically printed a Memory Clear Report that showed those jobs were deleted. Fortunately I recognized the numbers of the senders and was able to contact them and get those faxes resent to us.
×
SOURCE: Sir, can anyone help me with my fax (canon fax
You either have a paper path blockage or your feed rollers are worn. You'll need to take it apart to check though. Try removing paper, turning machine off and on and re-inserting paper. Remember to fan (separate) paper before loading, it could be static causing the sheets to stick together and jam in the machine.
1,268 views
Usually answered in minutes!
Same problem. Tried loading paper, then opening and closing cover. Doesn't seem to work. Any other suggestions?
I tried opening & closing the machine but it still indicates I need to load paper.
×