How to hook up power supply cord to a GE Model AZ25E09D3BM1

It should just plug in. should be a 120 volt power cord attached to the machine back. If its missing you need a power cord.

You can find replacement cords for many counter top appliances at most appliance and building supply stores. Try Ace, Home Depot, Lowes. Take the cooker with you to make sure you are getting the corect cord.

Hi .. you can find replacement cords for many counter top appliances at most appliance and building supply stores. Try Ace, Home Depot, Lowes.

I would try searching on ebay or getting in contact with Western Digital support.For ebay just put model number in search and press search and dont put in power cord since sometimes people just put it under name. Hope this helps.

You can find replacement cords for many counter top appliances at most appliance and building supply stores. Try Ace, Home Depot, Lowes. Take the cooker with you to make sure you are getting the correct cord.

If your dryer came with a regular grounded cord attached, it is a gas dryer, and you will have to hook up a gas line to the 3/8 pipe nipple at the lower left corner (when viewed from behind). The 4 prong power cord is only used for electric only models. If still unsure, post the model number from the sticker inside the door of the dryer.

your condensation line is blocked

If I had that problem, I would goto a (Radio Shack) Circuit City with the power supply.

You can use almost any adaptor, so long as the voltage is the same and the amperage is the same.
These are located on the transformer itself... you will see V120 Amp250mA.

Then the fun task of making sure that the connector post is the right size, the people at Circuit City will know.

what is the power supply for

DO NOT CHANGE THE POWER SUPPLY CORD.
you can't change the power supply cord.
the cord came with the dryer is 240v. the three prong is 120v. the dryer will burn up. if you change the power cord without changing the regulator , motor, and the heating element.
you need to get a electrician to run a 240v double breaker from the panel to the dryer.