How do i replace the reading light blub? - Jeep 2006 Grand Cherokee Laredo

gotta remove headlight. replace the blub next to the hid tiny blub common problem

Q box

fuse isn't any good ussually tied to the ac outlet, check the ac outlet on the range for power it probibly isn't working either,this will confirm it for you.

Try another blub and check to make sure the cover for the blub is on and the liltte switch is being triggerd by the cover to tell the unite the blub cover is on. Kinda like on a washing machine. Good Luck

Start at the front towards the winshield with a very small flat headed screwdriver. Getting under the lip of the light cover in the front pop the 2 front clip down in the front. Do Not do this on the seat side or you brake the clip that turn the light on/off. After poping the front down, side out towards winshield. The blub removes by turning counterclockwise. Blub is a 578

there are two different dome lights in the supercrew one is connected to the garage door opener and sunglass holder other wise known as map lights. to get these out just simply pull the unit and the blubs unscrew from the back insert the new blubs and replace the unit. the other type depends on the model of f150 you have one is the normal dome light in witch you just pop the cover off and replace the light. the other is just like the front map light where you just pull the unit out and replace the bulbs the same way.

open up the rear hatch and remove the panel in the corner you are replacing the blub and then you see small screws or nuts that you have to remove and it maybe the kind you just twist the blub out of the socket.

Hello scooterr1105,

If you have an all digital dash, then no, there is no light bulb to replace. It is a digital device, such as that of a calculator. While I am not familiar with these types of dashes, there may be some type of element in there that merely needs replaced. My Odemeter (milieage indicator) is lighted as such as well. I haven't had any issues with it as of yet, but I imagine there may be something to replace, rather than the whole part. I would call the manufacturer, or the dealer to research this more.

Thank you for choosing fixya.com. My apologize for not having a solution for you that would fix it.

Thank you for choosing fixya.com

carsandcomps
Guru, fixya.com
Oregon

go to your parts store and purchase the new halegeon blub. READ very carefully the instructions on the box. DO NOT TOUCH the new blub lens.

Carefully pull and twist out the old blub and remove it from its base. Using the special material or a glove, install the new blub in the base, and then carefully insert it back into the headlight shell.
Bill

after disassembly of dash and unit is away from dahboard enough to see. you will see fiber optic wires that go into one cluster. the could be white or black. it has one light bulb in that cluster it will twist out for replacement.